Specifications and review tractor J.I. Case 570 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The J.I. Case 570 is a 2WD farm tractor from the series. This tractor was manufactured by J.I. Case in Racine, Wisconsin, USA from 1970 to 1973.
The J.I. Case 570 is equipped with one of two engines: a 2.6 L (158.7 cu·in) four-cylinder gasoline engine or a 3.1 L (188.4 cu·in) four-cylinder diesel engine and one of three transmissions: a gear type transmission with 4 forward and 1 reverse gears, a gear type transmission with 8 forward and 2 reverse gears or a mechanical shuttle transmission with 8 forward and 8 reverse gears.
The tractor could be equipped with the following engines:
J.I. Case. It is a 2.6 L, 2,600 cm2, (158.7 cu·in) four-cylinder natural aspirated gasoline engine with 89.0 mm (3.5 in) of the cylinder bore and 105.0 mm (4.13 in) of the piston stroke. The compression ratio rating is 7.42:1.
J.I. Case. It is a 3.1 L, 3,087 cm2, (188.4 cu·in) four-cylinder natural aspirated diesel engine. The cylinder bore is 97.0 mm (3.82 in) and the piston stroke is 105.0 mm (4.13 in). The compression ratio rating is 17.5:1.
The J.I. Case 570 is equipped with hydrostatic power steering, open operator station and 83.3 liters (22 US gal.; 18.3 Imp. gal) fuel tank.
J.I. Case 570 Specifications
General Specifications
Model
J.I. Case 570
Length
–
Width
–
Height
–
Wheel base
–
Weight
1,770 kg (3,902 lbs)
Fuel tank capacity
83.3 liters (22 US gal.; 18.3 Imp. gal)
Battery
–
Cabin type
Open operator station
Engine
Engine model
J.I. Case
Engine type
Four-stroke, liquid-cooled, inline
Cylinders
4
Fuel type
Gasoline
Displacement
2.6 L, 2,600 cm2, (158.7 cu·in)
Bore and stroke
89.0 mm X 105.0 mm (3.5 in X 4.13 in)
Compression ratio
7.42:1
Horsepower
–
Starter
Electric
Coolant capacity:
13.2 L (13.9 US. qt, 11.6 Imp. qt.)
Engine
Engine model
J.I. Case
Engine type
Four-stroke, liquid-cooled, inline
Cylinders
4
Fuel type
Diesel
Displacement
3.1 L, 3,087 cm2, (188.4 cu·in)
Bore and stroke
97.0 mm X 105.0 mm (3.82 in X 4.13 in)
Compression ratio
17.5:1
Horsepower
–
Starter
Electric
Transmission and chassis
Chassis
4×2 2WD
Steering type
Hydrostatic power
Brakes
–
Transmission model
–
Transmission type
Gear type
Gears
4 forward and 1 reverse
Transmission model
–
Transmission type
Gear type
Gears
8 forward and 2 reverse
Transmission model
–
Transmission type
Mechanical shuttle
Gears
8 forward and 8 reverse
Tires
Front tires
Ag:
Rear tires
Ag:
Three-Point Hitch
Category
I
Control type
–
Lift capacity (at ends)
–
PTO (Power take-off shaft)
Rear PTO type
Independent
Rear PTO speed
540 rpm
Hydraulic system
Hydraulic type
–
Pump flow
35.2 gpm (133.2 lpm)
Maybe that’s all the information about the J.I. Case 570 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you
The J.I. Case 570 is a 2WD farm tractor from the series. This tractor was manufactured by J.I. Case in Racine, Wisconsin, USA from 1970 to 1973. 
