J.I. Case 870

Specifications and review tractor J.I. Case 870 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

J.I. Case 870The J.I. Case 870 is a 2WD row-crop tractor from the 70 series. This tractor was manufactured by J.I. Case in Racine, Wisconsin, USA from 1970 to 1975.

The J.I. Case 870 row-crop tractor is equipped with one of two engines: a 5.5 L (336.0 cu·in) four-cylinder diesel engine or a 4.9 L (301.0 cu·in) four-cylinder gasoline engine and one of two transmissions: an unsynchronized gear transmission with 8 forward and 2 reverse gears or a partial power shift transmission with 12 forward and 4 reverse gears.

The tractor could be equipped with the following engines:

  • J.I. Case diesel engine. It is a 5.5 L, 5,506 cm2, (336.0 cu·in) four-cylinder natural aspirated diesel engine with 117.0 mm (4.61 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 16.5:1.
  • J.I. Case gasoline engine. It is a 4.9 L, 4,932 cm2, (301.0 cu·in) four-cylinder natural aspirated gasoline engine. The cylinder bore is 111.0 mm (4.37 in) and the piston stroke is 127.0 mm (5 in). The compression ratio rating is 7.5:1.

The J.I. Case 870 is equipped with power steering, differential hydraulic dry disc brakes, open operator station or cab (optional), and 189.3 liters (50 US gal.; 41.6 Imp. gal) fuel tank.


J.I. Case 870 Specifications

General Specifications
Model J.I. Case 870
Length 3,880 mm (152.8 in)
Width
Height (hood) 1,700 mm (66.9 in)
Wheel base Wide-front: 2,560 mm (100.8 in)
Tricycle: 2,380 mm (93.7 in)
Ground clearance 380 mm (15 in)
Weight 4,173 kg (9,200 lbs)
Fuel tank capacity 189.3 liters (50 US gal.; 41.6 Imp. gal)
Battery
Cabin type Open operator station or Cab (optional)
Engine
Engine model J.I. Case
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 5.5 L, 5,506 cm2, (336.0 cu·in)
Bore and stroke 117.0 mm X 127.0 mm (4.61 in X 5 in)
Compression ratio 16.5:1
Horsepower
Starter Electric
Coolant capacity: 26.5 L (28 US. qt, 23.3 Imp. qt.)
Engine
Engine model J.I. Case
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Gasoline
Displacement 4.9 L, 4,932 cm2, (301.0 cu·in)
Bore and stroke 111.0 mm X 127.0 mm (4.37 in X 5 in)
Compression ratio 7.5:1
Horsepower
Starter Electric

Transmission and chassis
Chassis 4×2 2WD
Steering type Power
Brakes Differential hydraulic dry disc
Transmission model
Transmission type Unsynchronized gear with dry disc clutch
Gears 8 forward and 2 reverse
Speed Forward: 24.1 kmh (15 mph) Reverse: 12.2 kmh (7.6 mph)
Transmission model Range Power Shift
Transmission type Partial power shift with hydraulic wet discs clutch
Gears 12 forward and 4 reverse
Speed Forward: 27.4 kmh (17 mph) Reverse: 27.4 kmh (17 mph)
Tires
Front tires Ag: 7.50-16
Rear tires Ag: 18.4-34

Three-Point Hitch
Category II
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540, 540/1000 rpm
Hydraulic system
Hydraulic type
Pump flow 16.0 gpm (60.6 lpm)
Steering flow 8.0 gpm (30.3 lpm)
Total flow 24.0 gpm (90.8 lpm)

Maybe that’s all the information about the J.I. Case 870 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment