J.I. Case 885

Specifications and review tractor J.I. Case 885 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

J.I. Case 885The J.I. Case 885 is a 2WD utility tractor manufactured by David Brown in Meltham Mills, Huddersfield, England from 1976 to 1980.

The J.I. Case 885 is equipped with one of two engines: a 2.7 L (164.4 cu·in) three-cylinder diesel engine or a 2.4 L (146.1 cu·in) three-cylinder gasoline engine and a partially synchronized transmission with 12 forward and 4 reverse gears.

The Case 885 used manual or hydrostatic power (optional) steering, differential mechanical drum brakes, an open operator station and 48.0 liters (12.7 US gal.; 10.6 Imp. gal) fuel tank.

The tractor could be equipped with the following engines:

  • David Brown. It is a 2.7 L, 2,694 cm2, (164.4 cu·in) three-cylinder natural aspirated diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 114.0 mm (4.49 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 48 PS (35.3 kW; 47.3 HP) at 2,200 rpm of output power.
  • David Brown. It is a 2.4 L, 2,394 cm2, (146.1 cu·in) three-cylinder natural aspirated gasoline engine. The cylinder bore is 100.0 mm (3.94 in) and the piston stroke is 102.0 mm (4.02 in). The compression ratio rating is 6.75:1.

J.I. Case 885 Specifications

General Specifications
Model J.I. Case 885
Length 2,940 mm (115.7 in)
Width 1,650 mm (65 in)
Height (ROPS) 2,380 mm (93.7 in)
Wheel base 1,950 mm (76.8 in)
Ground clearance Front axle: 430 mm (16.9 in)
Drawbar: 300 mm (11.8 in)
Weight 2,450 kg (5,401 lbs)
Fuel tank capacity 48.0 liters (12.7 US gal.; 10.6 Imp. gal)
Battery 12V, 86Ah
Cabin type Open operator station
Engine
Engine model David Brown
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.7 L, 2,694 cm2, (164.4 cu·in)
Bore and stroke 100.0 mm X 114.0 mm (3.94 in X 4.49 in)
Compression ratio 17.0:1
Horsepower 48 PS (35.3 kW; 47.3 HP) at 2,200 rpm
Starter Electric
Oil capacity: 6.2 L (6.6 US. qt, 5.5 Imp. qt.)
Coolant capacity: 8.5 L (9 US. qt, 7.5 Imp. qt.)
Engine
Engine model David Brown
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Gasoline
Displacement 2.4 L, 2,394 cm2, (146.1 cu·in)
Bore and stroke 100.0 mm X 102.0 mm (3.94 in X 4.02 in)
Compression ratio 6.75:1
Horsepower
Starter electric

Transmission and chassis
Chassis 4×2 2WD
Steering type Manual or hydrostatic power (optional)
Brakes Differential mechanical drum
Transmission model
Transmission type Partially synchronized
Gears 12 forward and 4 reverse
Speed Forward: 26.4 kmh (16.4 mph) Reverse: 15.0 kmh (9.3 mph)
Transmission oil capacity 23.0 L (6.1 US. gal, 5.1 Imp. gal.)
Tires
Front tires Ag: 6.00-16
Rear tires Ag: 14.9-28 , 12.4-28, 12.4-32

Three-Point Hitch
Category II/I
Control type
Lift capacity (at ends) 820 kg (1808 lbs)
PTO (Power take-off shaft)
Rear PTO type
Rear PTO speed 540/1,000 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 22.7 L (6 US. gal, 5 Imp. gal.)
Pressure 2000 psi (137.9 bar)
Total flow 7.4 gpm (28 lpm)

Maybe that’s all the information about the J.I. Case 885 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment