J.I. Case 970 (1974-1978)

Specifications and review tractor J.I. Case 970 (1974-1978) Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

J.I. Case 970 The J.I. Case 970 is a 2WD row-crop tractor from the 70 series. This tractor was manufactured by J.I. Case in Racine, Wisconsin, USA from 1970 to 1978. This second genearation was manufactured from 1974 to 1978. The J.I. Case 970 is equipped with a 6.6 L (401.0 cu·in) six-cylinder diesel engine and one of two transmissions: a unsynchronized gear transmission with 8 forward and 2 reverse gears or a partial power shift transmission with 12 forward and 4 reverse gears.

The J.I. Case 970 row-crop tractor used the J.I. Case engine. It is a 6.6 L, 6,571 cm2, (401.0 cu·in) six-cylinder natural aspirated diesel engine with 105.0 mm (4.13 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 87.2 PS (64.1 kW; 86 HP) at 2,000 rpm of output power.

The J.I. Case 970 is equipped with hydrostatic power steering, differential hydraulic dry disc brakes, an open operator station or cab (optional) and 189.3 liters (50.0 US gal.; 41.6 Imp. gal) fuel tank.

J.I. Case 970 Specifications

General Specifications
Model J.I. Case 970
Wheel base 2,740 mm (107.9 in)
Weight (operating) Gas manual: 4,558 kg (10,049 lbs)
Power-Shift diesel: 5,075 kg (11,188 lbs)
Fuel tank capacity 189.3 liters (50.0 US gal.; 41.6 Imp. gal)
Battery One 12V (gasoline), Two 12V (diesel)
Cabin type Open operator station or Cab (optional)
Engine model J.I. Case
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 6.6 L, 6,571 cm2, (401.0 cu·in)
Bore and stroke 105.0 mm X 127.0 mm (4.13 in X 5 in)
Compression ratio 16.5:1
Horsepower 87.2 PS (64.1 kW; 86.0 HP) at 2,000 rpm
Starter Electric
Coolant capacity: 36.0 L (38 US. qt, 31.7 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD
Steering type Hydrostatic power
Brakes Differential hydraulic dry disc
Transmission model
Transmission type Unsynchronized gear with dry disc clutch
Gears 8 forward and 2 reverse
Transmission model Range Power Shif
Transmission type Partial power shift with hydraulic wet disc clutch
Gears 12 forward and 4 reverse
Front tires Ag: 10.00-16
Rear tires Ag: 18.4-38

Three-Point Hitch
Category II
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type
Rear PTO speed 540/1000 rpm
Hydraulic system
Hydraulic type
Pump flow 16.0 gpm (60.6 lpm)
Steering flow 8.0 gpm (30.3 lpm)
Total flow 24.0 gpm (90.8 lpm)

Maybe that’s all the information about the J.I. Case 970 (1974-1978) tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment