Specifications and review tractor J.I. Case DC Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The J.I. Case DC is a 2WD row-crop tractor from the D series. This tractor was manufactured by J.I. Case in Racine, Wisconsin, USA from 1939 to 1953.
The J.I. Case DC is equipped with one of two engines: a 4.3 L (259.5 cu·in) four-cylinder gasoline engine or a 4.3 L (259.5 cu·in) four-cylinder LP-gas engine and a gear type transmission with 4 forward and 1 reverse gears and dry disc clutch.
The J.I. Case DC used manual steering, open operator station and 71.9 liters (19 US gal.; 15.8 Imp. gal) fuel tank.
The tractor could be equipped with the following engines:
- J.I. Case. It is a 4.3 L, 4,259 cm2, (259.9 cu·in) four-cylinder natural aspirated gasoline engine with 98.0 mm (3.86 in) of the cylinder bore and 140.0 mm (5.51 in) of the piston stroke. The compression ratio rating is 5.58:1.
- J.I. Case. It is a 4.3 L, 4,259 cm2, (259.9 cu·in) four-cylinder natural aspirated LP-gas engine. The cylinder bore is 98.0 mm (3.86 in) and the piston stroke is 140.0 mm (5.51 in).
The tractor variants:
- D: standard-tread
- DC: row-crop
- DC-3: narrow front
- DC-4: wide-front
- DH: wide-front without turning brakes
|
J.I. Case DC Specifications
General Specifications | |
Model | J.I. Case DC |
Length |
DC3: 3,650 mm (143.7 in) DC4: 3,300 mm (129.9 in) |
Width | 2,050 mm (80.7 in) |
Height (hood) | 1,470 mm (57.9 in) |
Wheel base |
DC3: 2,250 mm (88.6 in) DC4: 1,890 mm (74.4 in) |
Ground clearance (rear axle) | 620 mm (24.4 in) |
Weight | 2,405 kg (5,302 lbs) |
Fuel tank capacity |
71.9 liters (19 US gal.; 15.8 Imp. gal) Distillate: 64.3 liters (17 US gal, 14.1 Imp. gal) |
Battery | – |
Cabin type | Open operator station |
Engine | |
Engine model | J.I. Case |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Gasoline |
Displacement | 4.3 L, 4,259 cm2, (259.9 cu·in) |
Bore and stroke | 98.0 mm X 140.0 mm (3.86 in X 5.51 in) |
Compression ratio | 5.58:1 |
Horsepower | – |
Starter | Electric |
Coolant capacity: | 24.6 L (26 US. qt, 21.6 Imp. qt.) |
Engine | |
Engine model | J.I. Case |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | LP-gas |
Displacement | 4.3 L, 4,259 cm2, (259.9 cu·in) |
Bore and stroke | 98.0 mm X 140.0 mm (3.86 in X 5.51 in) |
Horsepower | – |
Starter | Electric |
|
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Manual |
Brakes | – |
Transmission model | – |
Transmission type | Gear type with dry disc clutch |
Gears | 4 forward and 1 reverse |
Speed | Forward: 16.1 kmh (10 mph) Reverse: 4.4 kmh (2.7 mph) |
Tires | |
Front tires | Ag: 5.50-16 |
Rear tires | Ag: 11.25-36 |
|
Three-Point Hitch | |
Type | Case Eagle Hitch |
Control type | – |
Lift capacity (at ends) | – |
PTO (Power take-off shaft) | |
Rear PTO type | Continuous or live (optional) |
Rear PTO speed | 540 rpm |
Maybe that’s all the information about the J.I. Case DC tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you