JCB Fastrac 185

Specifications and review tractor JCB Fastrac 185 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

JCB Fastrac 185The JCB Fastrac 185 is a four-wheel drive (4WD) tractor manufactured by JCB from 1994 to 1997. The JCB Fastrac 185 is equipped with a 5.9 L (358.8 cu·in) six-cylinder diesel engine and a synchromesh transmission with 36 forward and 12 reverse gears.

The JCB Fastrac 185 tractor used the Cummins 6 BTA engine. It is a 5.9 L, 5,879 cm2, (358.8 cu·in) six-cylinder turbocharged intercooled diesel engine with 102.0 mm (4.02 in) of the cylinder bore and 120.0 mm (4.72 in) of the piston stroke. This engine produced 190.7 PS (140.2 kW; 188 HP) at 2,400 rpm of output power.

The JCB Fastrac 185 is equipped with power assist steering, pneumatic dry disc brakes, Cab with air conditioning, and 280.0 liters (74 US gal.; 61.6 Imp. gal) fuel tank.

JCB Fastrac 185 Specifications

General Specifications
Model JCB Fastrac 185
Length 5,760 mm (226.8 in)
Width 2,360 mm (92.9 in)
Height 2,970 mm (116.9 in)
Wheel base 2,990 mm (117.7 in)
Ground clearance 400 mm (15.7 in)
Weight 6,500 kg (14,330 lbs)
Fuel tank capacity 280.0 liters (74 US gal.; 61.6 Imp. gal)
Battery Two 12V
Cabin type Cab with air conditioning
Engine model Cummins 6 BTA
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 5.9 L, 5,879 cm2, (358.8 cu·in)
Bore and stroke 102.0 mm X 120.0 mm (4.02 in X 4.72 in)
Horsepower 190.7 PS (140.2 kW; 188.0 HP) at 2,400 rpm
Torque 750.0 N·m (76.5 kg·m, 552.8 ft·lb) at 1,400 rpm
Starter Electric

Transmission and chassis
Chassis 4×4 4WD
Steering type Power assist
Brakes Pneumatic dry disc
Transmission model
Transmission type Synchromesh
Gears 36 forward and 12 reverse
Front tires Ag: 520/70R30
Rear tires Ag: 520/70R30

Three-Point Hitch
Caterogy III/IIIN
Control type Electronic draft control
Lift capacity (at ends) 7,000 kg (15,435 lbs)
Front Hitch
Caterogy II
Lift capacity (at ends) 3,000 kg (6,615 lbs)
PTO (Power take-off shaft)
Front PTO type Independent
Front PTO speed 540/1,000 rpm
Rear PTO type Independent with electro-hydraulic clutch
Rear PTO speed 540/1,000 rpm
Hydraulic system
Hydraulic type
Hydraulic capacity 60.0 L (15.9 US gal, 13.2 Imp. gal)
Pressure 3045 psi (210 bar)
Valves 2
Pump flow 15.85 gpm (60.0 lpm)
20.3 gpm (76.8 lpm)
Total flow 20.8 gpm (78.7 lpm)

Maybe that’s all the information about the JCB Fastrac 185 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment