John Deere 1026R

Specifications and review tractor John Deere 1026R Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 1026RThe John Deere 1026R is a 4WD sub-compact utility tractor from the Sub-Compact 1 series. This tractor was manufactured by John Deere in Augusta, Georgia, USA from 2011 to 2012. The John Deere 1026R is equipped with a 1.1 L three-cylinder diesel engine and hydrostatic transmission with infinite (2-range) forward and reverse gears.

The John Deere 1026R sub-compact utility tractor used the Yanmar 3TNV76 engine. It is a 1.1 L, 1,116 cm2, (68.0 cu·in) three-cylinder natural aspirated diesel engine with 74.0 mm (2.91 in) of the cylinder bore and 81.0 mm (3.19 in) of the piston stroke. The compression ratio rating is 23.5:1. This engine produced 25.6 PS (18.8 kW; 25.2 HP) at 3,200 rpm of maximum output power.

The John Deere 1026R is equipped with power steering, wet disc brakes, open operator station with two-post ROPS and 21.0 liters (5.5 US gal.; 4.6 Imp. gal) fuel tank.

Following attachments are available for the John Deere 1026R sub-compact utility tractor:

  • Mid-mount John Deere 54D AutoConnect 54 in (1,370 mm) mower deck
  • Mid-mount John Deere 60D AutoConnect 60 in (1,520 mm) mower deck
  • John Deere D120 loader
  • John Deere H120 backhoe

John Deere 1026R Specifications

General Specifications
Model John Deere 1026R
Length 2,220 mm (87.4 in)
Width 1,190 mm (46.9 in)
Height 1,990 mm (78.3 in)
Wheel base 1,450 mm (57.1 in)
Weight 654 kg (1,442 lbs)
Fuel tank capacity 21.0 liters (5.5 US gal.; 4.6 Imp. gal)
Battery 12V, CCA 500A
Cabin type Open operator station with two-post ROPS
Engine model Yanmar 3TNV76
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.1 L, 1,116 cm2, (68.0 cu·in)
Bore and stroke 76.0 mm X 82.0 mm (2.99 in X 3.23 in)
Compression ratio 23.5:1
Horsepower 25.6 PS (18.8 kW; 25.2 HP) at 3,200 rpm
Starter Electric
Oil capacity: 2.7 L (2.9 US. qt, 2.4 Imp. qt.)
Coolant capacity: 3.7 L (3.9 US. qt, 3.3 Imp. qt.)

Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Power
Brakes Wet disc
Transmission model
Transmission type Hydrostatic
Gears Infinite (2-range) forward and reverse
Speed Forward: 14.6 kmh (9.1 mph) Reverse: 14.6 (9.1 mph)
Transmission oil capacity 12.3 L (3.2 US. gal, 2.7 Imp. gal.)
Front tires Lawn/turf: 18×8.5-10
Rear tires Lawn/turf: 26×12.00-12

Three-Point Hitch
Caterogy I Limited
Control type Position control
Lift capacity (at ends) 650 kg (1,430 lbs)
PTO (Power take-off shaft)
Middle PTO type Independent
Middle PTO speed 2,100 rpm
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 12.3 L (13 US. qt, 10.82 Imp. qt.)
Pressure 2,000 psi (138 bar)
Valves 2 to 3
Total flow 6.3 gpm (23.8 lpm)

Maybe that’s all the information about the John Deere 1026R tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment