Specifications and review tractor John Deere 110TLB Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The John Deere 110TLB is a 4WD backhoe loader tractor from the series. This tractor was manufactured by the John Deere from 2000 to 2012. The John Deere 110TLB is equipped with a 2.2 L four-cylinder diesel engine and hydrostatic transmission with infinite (3-range) forward and reverse gears.
The John Deere 110TLB backhoe loader tractor used the Yanmar 4TNV88 engine. It is a 2.2 L, 2,189 cm2, (133.6 cu·in) four-cylinder natural aspirated diesel engine with 88,0 mm (3.46 in) of the cylinder bore and 90,0 mm (3.54 in) of the piston stroke. The compression ratio rating is 19.0:1. This engine produced 41.6 PS (30.6 kW; 41.0 HP) at 2,600 rpm of maximum output power.
The John Deere 110TLB is equipped with power steering, mechanical wet disc brakes, four-post ROPS and 58.0 liters (15.3 US gal.; 12.8 Imp. gal) fuel tank.
Following attachments are available for the John Deere 110TLB backhoe loader tractor:
John Deere loader
John Deere backhoe
John Deere 110TLB Specifications
General Specifications
Model
John Deere 110TLB
Length
7,510 mm (295.7 in)
Width
2,180 mm (85.8 in)
Height
2,560 mm (100.8 in)
Wheel base
1,810 mm (71.3 in)
Weight
3,447 kg (7,599 lbs)
Fuel tank capacity
58.0 liters (15.3 US gal.; 12.8 Imp. gal)
Battery
12V, CCA 770A
Cabin type
Four-post ROPS
Engine
Engine model
Yanmar 4TNV88
Engine type
Four-stroke, liquid-cooled, inline
Cylinders
4
Fuel type
Diesel
Displacement
2.2 L, 2189 cm2, (133.6 cu·in)
Bore and stroke
88,0 mm X 90,0 mm (3.46 in X 3.54 in)
Compression ratio
19.0:1
Horsepower
41.6 PS (30.6 kW; 41 HP) at 2,600 rpm
Starter
Electric
Oil capacity:
4.7 L (5 US. qt, 4.1 Imp. qt.)
Coolant capacity:
9.5 L (10 US. qt, 8.4 Imp. qt.)
Transmission and chassis
Chassis
4×4 MFWD 4WD
Steering type
Power
Brakes
Mechanical wet disc
Transmission model
–
Transmission type
Hydrostatic
Gears
Infinite (3-range) forward and reverse
Speed
Forward: 26.1 kmh (16.2 mph) Reverse: (0 mph)
Tires
Front tires
Industrial: 10×16.5
Rear tires
Industrial: 17.5×24
Three-Point Hitch
Caterogy
I
Control type
–
Lift capacity (at ends)
1,420 kg (3,131 lbs)
PTO (Power take-off shaft)
Rear PTO type
Independent
Rear PTO spped
540 rpm
Hydraulic system
Hydraulic type
Open center
Hydraulic capacity
56.8 L (60.02 US. qt, 49.98 Imp. qt.)
Pressure
3000 psi (206.8 bar)
Total flow
23.6 gpm (89.3 lpm)
Maybe that’s all the information about the John Deere 110TLB tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you
The John Deere 110TLB is a 4WD backhoe loader tractor from the series. This tractor was manufactured by the John Deere from 2000 to 2012. The John Deere 110TLB is equipped with a 2.2 L four-cylinder diesel engine and hydrostatic transmission with infinite (3-range) forward and reverse gears.
