John Deere 1450

Specifications and review tractor John Deere 1450 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 1450The John Deere 1450 is a 2WD or 4WD utility tractor manufactured by Yanmar for distributor John Deere in Japan from 1984 to 1988. The John Deere 1450 is equipped with a 3.1 L (190.3 cu·in) four-cylinder diesel engine and a sliding gear transmission with 9 forward and 3 reverse gears.

The JD 1450 utility tractor used the Yanmar engine. It is a 3.1 L, 3,118 cm2, (190.3 cu·in) four-cylinder natural aspirated diesel engine with 95.0 mm (3.74 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 18.0:1. This engine produced 55.8 PS (41.0 kW; 55.0 HP) at 2,400 rpm of output power.

The John Deere 1450 is equipped with power assist steering, differential hydraulic wet disc brakes, an open operator station with ROPS, and 80.0 liters (21.1 US gal.; 17.6 Imp. gal) fuel tank.


John Deere 1450 Specifications

General Specifications
Model John Deere 1450
Length
Width
Height
Wheel base 2,100 mm (82.7 in)
Weight (shipping) 2WD: 2,000 kg (4,409 lbs)
4WD: 2,300 kg (5,071 lbs)
Fuel tank capacity 80.0 liters (21.1 US gal.; 17.6 Imp. gal)
Battery 12V
Cabin type Open operator station with ROPS
Engine
Engine model Yanmar
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.1 L, 3,118 cm2, (190.3 cu·in)
Bore and stroke 95.0 mm X 110.0 mm (3.74 in X 4.33 in)
Compression ratio 18.0:1
Horsepower 55.8 PS (41.0 kW; 55.0 HP) at 2,400 rpm
Starter Electric
Oil capacity: 12.0 L (12.7 US. qt, 10.6 Imp. qt.)
Coolant capacity: 10.5 L (11.1 US. qt, 9.2 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power assist
Brakes Differential hydraulic wet disc
Final drive Planetary
Differential lock Mechanical
Transmission model
Transmission type Sliding gear
Gears 9 forward and 3 reverse
Speed Forward: 25.7 kmh (16 mph) Reverse: kmh (0 mph)
Tires
Front tires Ag: 6.50-16
Rear tires Ag: 14.9-28

Three-Point Hitch
Category II/I
Control type Center link sensing with position and draft contro
Lift capacity (at ends) 1,200 kg (2650 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Valves 0 to 2
Total flow 10.7 gpm (40.5 lpm)

Maybe that’s all the information about the John Deere 1450 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment