John Deere 1650

Specifications and review tractor John Deere 1650 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 1650The John Deere 1650 is a 2WD or 4WD utility tractor manufactured by Yanmar for distributor John Deere from 1984 to 1988. The John Deere 1650 is equipped with a 3.1 L (190.0 cu·in) four-cylinder diesel engine and a sliding gear transmission with 9 forward and 3 reverse gears.

The JD 1650 utility tractor used the Yanmar engine. It is a 3.1 L, 3,114 cm2, (190.0 cu·in) four-cylinder turbocharged diesel engine with 95.0 mm (3.74 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 18.0:1. This engine produced 68 PS (50.0 kW; 67.0 HP) of output power.

The John Deere 1650 is equipped with power steering, differential hydraulic wet disc brakes, an open operator station with two-post ROPS, and 80.0 liters (21.1 US gal.; 17.6 Imp. gal) fuel tank.


John Deere 1650 Specifications

General Specifications
Model John Deere 1650
Length
Width
Height
Wheel base 2,100 mm (82.7 in)
Weight (shipping) 2WD: 2,100 kg (4,630 lbs)
4WD: 2,400 kg (5,291 lbs)
Fuel tank capacity 80.0 liters (21.1 US gal.; 17.6 Imp. gal)
Battery 12V
Cabin type Open operator station with two-post ROPS
Engine
Engine model Yanmar
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.1 L, 3,114 cm2, (190.0 cu·in)
Bore and stroke 95.0 mm X 110.0 mm (3.74 in X 4.33 in)
Compression ratio 18.0:1
Horsepower 68 PS (50.0 kW; 67.0 HP)
Starter Electric
Oil capacity: 12.0 L (12.7 US. qt, 10.6 Imp. qt.)
Coolant capacity: 10.5 L (11.1 US. qt, 9.2 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Differential hydraulic wet disc
Final drive Planetary
Differential lock Mechanical
Transmission model
Transmission type Sliding gear
Gears 9 forward and 3 reverse
Speed Forward: 25.6 kmh (15.9 mph)
Tires
Front tires Ag: 6.50-16
Rear tires Ag: 16.9-28

Three-Point Hitch
Category II/I
Control type Center link sensing with position and draft contro
Lift capacity (at 610 mm/ 24 in) 1,220 kg (2,690 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Valves 0 to 2
Total flow 10.2 gpm (38.6 lpm)

Maybe that’s all the information about the John Deere 1650 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment