John Deere 1950

Specifications and review tractor John Deere 1950 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 1950The John Deere 1950 is a 2WD or 4WD utility tractor manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1988 to 1994. The John Deere 1950 is equipped with a 2.9 L (179.3 cu·in) three-cylinder diesel engine and one of three transmissions: a synchromesh transmission with 8 forward and 4 reverse gears, a two-speed power shift transmission with 16 forward and 8 reverse gears or a creeper with 12 forward and 8 reverse gears.

The JD 1950 utility tractor used the John Deere engine. It is a 2.9 L, 2,939 cm2, (179.3 cu·in) three-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. This engine produced 62.6 PS (46.0 kW; 61.7 HP) at 2,300 rpm of net output power.

The John Deere 1950 is equipped with manual or power (optional) steering, hydraulic wet disc brakes, ROPS or cab (optional) and 72.0 liters (19 US gal.; 15.8 Imp. gal) fuel tank.


John Deere 1950 Specifications

General Specifications
Model John Deere 1950
Length 3,760 mm (148 in)
Width 1,850 mm (72.8 in)
Height
Wheel base 2,150 mm (84.6 in)
Ground clearance (front axle) 2WD: 640 mm (25.2 in)
4WD: 430 mm (16.9 in)
Weight (shipping) 2WD ROPS: 2,630 kg (5,800 lbs)
2WD Cab: 2,790 kg (6,150 lbs)
4WD ROPS: 2,945 kg (6,495 lbs)
4WD Cab: 3,105 kg (6,845 lbs)
Fuel tank capacity 72.0 liters (19 US gal.; 15.8 Imp. gal)
Battery Two 12V, 55Ah (ROPS), 85Ah (Cab)
Cabin type ROPS. MC1 cab (optional), or CC2 cab after 1990.
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.9 L, 2,939 cm2, (179.3 cu·in)
Bore and stroke 106.0 mm X 110.0 mm (4.17 in X 4.33 in)
Horsepower (net) 62.6 PS (46.0 kW; 61.7 HP) at 2,300 rpm
Torque 229.0 N·m (23.4 kg·m, 168.8 ft·lb) at 1,500 rpm
Starter Electric

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Manual or power (optional)
Brakes Hydraulic wet disc
Final drive Planetary
Transmission model
Transmission type Synchromesh with dry disc clutch
Gears 8 forward and 4 reverse
Speed Forward: 30.0 kmh (18.6 mph) Reverse: 13.0 kmh (8.1 mph)
Transmission model Power Synchron
Transmission type Two-speed power shift with dry disc clutch
Gears 16 forward and 8 reverse
Speed Forward: 30.0 kmh (18.6 mph) Reverse: 13.0 kmh (8.1 mph)
Transmission model
Transmission type Creeper
Gears 12 forward and 8 reverse
Tires
Front tires Ag: 7.50-16 (2WD), 11.2-24 (4WD)
Rear tires Ag: 16.9-30

Three-Point Hitch
Category II/I
Control type Position and draft control
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Independent with hydraulic wet disc clutch
Rear PTO speed 540, 540/1000 rpm
Hydraulic system
Hydraulic type Closed center
Pressure 2756 psi (190 bar)
Pump flow 11.6 gpm (43.9 lpm)

Maybe that’s all the information about the John Deere 1950 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment