John Deere 2040 (1980-1982)

Specifications and review tractor John Deere 2040 (1980-1982) Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 2040 (1980-1982)The John Deere 2040 is a 2WD or 4WD utility tractor from the 2040 series. This tractor was manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1976 to 1982. This second generation was manufactured from 1980 to 1982. The JD 2040 is equipped with a 2.9 L (179.0 cu·in) three-cylinder diesel engine and a partially synchronized transmission with 8 forward and 4 reverse gears.

The John Deere 2040 utility tractor used the John Deere engine. It is a 2.9 L, 2,933 cm2, (179.0 cu·in) three-cylinder natural aspirated diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 16.7:1. This engine produced 40.5 PS (29.8 kW; 40.0 HP) at 2,500 rpm of output power.

The JD 2040 is equipped with power assist steering, hydraulic wet disc brakes, two-post Roll-Gard ROPS, and 62.5 liters (16.5 US gal.; 13.7 Imp. gal) fuel tank. This tractor could be equipped with the John Deere 175 loader.

John Deere 2040 Specifications

General Specifications
Model John Deere 2040
Length 3,330 mm (131.1 in)
Width 2,270 mm (89.4 in)
Height (hood) 1,330 mm (52.4 in)
Wheel base 2WD: 1,880 mm (74 in)
4WD: 2,050 mm (80.7 in)
Ground clearance 330 mm (13 in)
Weight 2WD: 2,180 kg (4,806 lbs)
4WD: 2,620 kg (5,776 lbs)
Fuel tank capacity 62.5 liters (16.5 US gal.; 13.7 Imp. gal)
Battery 12V
Cabin type Two-post Roll-Gard ROPS
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.9 L, 2,933 cm2, (179.0 cu·in)
Bore and stroke 106.0 mm X 110.0 mm (4.17 in X 4.33 in)
Compression ratio 16.7:1
Horsepower 40.5 PS (29.8 kW; 40.0 HP) at 2,500 rpm
Starter Electric

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power assist
Brakes Hydraulic wet disc
Final drive Planetary
Differential lock Mechanical rear
Transmission model Top-Shaft Synchronized (TSS)
Transmission type Partially synchronized
Gears 8 forward and 4 reverse
Speed Forward: 26.3 kmh (16.3 mph) Reverse: 11.8 kmh (7.3 mph)
Front tires Ag: 6.00-16 (2WD), 9.5-24 (4WD)
Rear tires Ag: 13.6-28 (2WD), 16.9-28 (4WD)

Three-Point Hitch
Category II
Control type Position control and lower-link draft sensing
Lift capacity (at 610 mm / 24 in) 1,088 kg (2,400 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Closed center
Pressure 2,250 psi (155.1 bar)
Valves 1
Pump flow 13.0 gpm (49.2 lpm)

Maybe that’s all the information about the John Deere 2040 (1980-1982) tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment