John Deere 2040 European

Specifications and review tractor John Deere 2040 European Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 2040The John Deere 2040 is a 2WD or 4WD utility tractor manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1979 to 1987 for European-market. This tractor was not related to the earlier US-market JD 2040, being closer to the John Deere 50-series tractors. The John Deere 2040 is equipped with a 3.9 L (239.2 cu·in) four-cylinder diesel engine and a partially synchronized transmission with 8 forward and 4 reverse gears.

The John Deere 2040 utility tractor used the John Deere engine. It is a 3.9 L, 3,920 cm2, (239.2 cu·in) four-cylinder natural aspirated diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 16.8:1. This engine produced 71 PS (52.2 kW; 70.0 HP) at 2,500 rpm of output power.

The JD 2040 is equipped with power steering, hydraulic disc brakes, an open operator station or cab (optional) and 95.0 liters (25.1 US gal.; 20.9 Imp. gal) fuel tank.

John Deere 2040 Specifications

General Specifications
Model John Deere 2040
Length 2WD: 3,730 mm (146.9 in)
4WD: 3,920 mm (154.3 in)
Width 2,070 mm (81.5 in)
Height Cab: 2,650 mm (104.3 in)
Exhaust: 2,920 mm (115 in)
Wheel base 2WD: 2,270 mm (89.4 in)
4WD: 2,280 mm (89.8 in)
Weight 2WD: 2,965 kg (6,537 lbs)
4WD: 3,305 kg (7,286 lbs)
Fuel tank capacity 95.0 liters (25.1 US gal.; 20.9 Imp. gal)
Battery 12V, 55 Ah
Cabin type Open operator station or Cab (optional)
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.9 L, 3,920 cm2, (239.2 cu·in)
Bore and stroke 106.0 mm X 110.0 mm (4.17 in X 4.33 in)
Compression ratio 16.8:1
Horsepower 71 PS (52.2 kW; 70.0 HP) at 2,500 rpm
Starter Electric
Oil capacity: 8.5 L (9 US. qt, 7.5 Imp. qt.)
Coolant capacity: 18.0 L (19 US. qt, 15.8 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Hydraulic disc
Transmission model
Transmission type Partially synchronized
Gears 8 forward and 4 reverse
Speed Forward: 30.4 kmh (18.9 mph) Reverse: 13.6 kmh (8.5 mph)
Transmission oil capacity 55.0 L (14.5 US. gal, 12.1 Imp. gal.)
Front tires Ag: 7.50-18 (2WD), 11.2-28 (4WD)
Rear tires Ag: 13.6/12-38

Three-Point Hitch
Category II
Control type
Lift capacity 3,070 kg (6,770 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with hydraulic clutch
Rear PTO speed 540, 1000 (optional) rpm
Hydraulic system
Hydraulic type Closed center
Hydraulic capacity 55.0 L (14.5 US. gal, 12.1 Imp. gal.)
Pressure 2466 psi (170 bar)
Pump flow 12.42 gpm (47 lpm)

Maybe that’s all the information about the John Deere 2040 European tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment