John Deere 2150

Specifications and review tractor John Deere 2150 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 2150The John Deere 2150 is a 2WD or 4WD utility tractor from the 2050 series. This tractor was manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1983 to 1986. The John Deere 2150 is equipped with a 2.9 L (179.0 cu·in) three-cylinder diesel engine and one of three transmissions: a partially synchronized transmission with 8 forward and 4 reverse gears, a partial power shift transmission with 16 forward and 8 reverse gears or a power shuttle transmission with 8 forward and 8 reverse gears.

The John Deere 2150 utility tractor used the John Deere engine. It is a 2.9 L, 2,933 cm2, (179.0 cu·in) three-cylinder natural aspirated diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 17.4:1. This engine produced 50.7 PS (37.3 kW; 50.0 HP) at 2,500 rpm of output power.

The JD 2150 is equipped with power assist steering, differential hydraulic wet disc brakes, two-post ROPS, and 74.0 liters (19.5 US gal.; 16.3 Imp. gal) fuel tank.

John Deere 2150 Specifications

General Specifications
Model John Deere 2150
Length 2WD: 3,050 mm (120.1 in)
4WD: 3,110 mm (122.6 in)
Width 1,740 mm (68.5 in)
Height (exhaust) 1,980 mm (78 in)
Wheel base 2WD: 1,880 mm (74.0 in)
4WD: 2,050 mm (80.9 in)
Ground clearance 2WD: 510 mm (20.1 in)
4WD: 410 mm (16.4 in)
Weight 2WD: 2,255 kg (4,970 lbs)
4WD: 2,570 kg (5,670 lbs)
Fuel tank capacity 74.0 liters (19.5 US gal.; 16.3 Imp. gal)
Battery 12V
Cabin type Two-post ROPS
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.9 L, 2,933 cm2, (179.0 cu·in)
Bore and stroke 106.0 mm X 110.0 mm (4.17 in X 4.33 in)
Compression ratio 17.4:1
Horsepower 50.7 PS (37.3 kW; 50.0 HP) at 2,500 rpm
Starter Electric
Coolant capacity: 10.4 L (11 US. qt, 9.2 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power assist
Brakes Differential hydraulic wet disc
Differential lock Rear standard
Transmission model John Deere Top-Shaft Synchronized
Transmission type Partially synchronized
Gears 8 forward and 4 reverse
Speed Forward: 26.8 kmh (16.7 mph) Reverse: 12.0 (7.5 mph)
Transmission model John Deere Hi-Lo TSS
Transmission type Partial power shift
Gears 16 forward and 8 reverse
Speed Forward: 29.4 kmh (18.3 mph) Reverse: 13.2 (8.2 mph)
Transmission model John Deere Direction Reverser
Transmission type Power shuttle
Gears 8 forward and 8 reverse
Front tires Ag: 6.50-16 (2WD), 9.5-24 (4WD)
Rear tires Ag: 13.6-28 (2WD), 16.9-28 (4WD)

Three-Point Hitch
Caterogy II/I
Control type Load and depth control
Lift capacity (at ends) 920 kg (2029 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent or live (with Direction Reverser)
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Closed center
Valves 0 to 2
Pump flow 13.0 gpm (49.2 lpm)

Maybe that’s all the information about the John Deere 2150 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment