John Deere 2210

Specifications and review tractor John Deere 2210 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 2210The John Deere 2210 is a 4WD sub-compact utility tractor manufactured by John Deere in Augusta, Georgia, USA from 2003 to 2006. The JD 2210 is equipped with a 1.0 L three-cylinder diesel engine and hydrostatic transmission with infinite (2-range) forward and reverse gears.

The JD 2210 sub-compact utility tractor used the Yanmar 3TNE74 engine. It is a 1 L, 1,001 cm2, (61.1 cu·in) three-cylinder natural aspirated diesel engine with 74.0 mm (2.91 in) of the cylinder bore and 78.0 mm (3.07 in) of the piston stroke. The compression ratio rating is 23.5:1. This engine produced 23.4 PS (17.2 kW; 23.0 HP) at 3,000 rpm of maximum output power.

The John Deere 2210 is equipped with power steering, wet disc brakes, open operator station with two-post ROPS and 19.0 liters (5 US gal.; 4.2 Imp. gal) fuel tank.

Following attachments are available for the John Deere 2210 sub-compact utility tractor:

  • Mid-mount John Deere 54C 54 in (1,370 mm) mower deck with 3-blades
  • Mid-mount John Deere 62D 62 in (1,570 mm) mower deck with 3-blades
  • Front-mount John Deere 54 in (1,370 mm) blade
  • Front-mount John Deere 46 in (1,160 mm) single-stage snow blower
  • John Deere 210 loader

John Deere 2210 Specifications

General Specifications
Model John Deere 2210
Length 2,640 mm (103.9 in)
Width 1,210 mm (47.6 in)
Height 1,990 mm (78.3 in)
Wheel base 1,440 mm (56.7 in)
Weight 635 kg (1,400 lbs)
Fuel tank capacity 19.0 liters (5 US gal.; 4.2 Imp. gal)
Battery 12V, CCA 435A
Cabin type Open operator station with two-post ROPS
Engine model Yanmar 3TNE74
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.0 L, 1,001 cm2, (61.1 cu·in)
Bore and stroke 74.0 mm X 78.0 mm (2.91 in X 3.07 in)
Compression ratio 23.5:1
Horsepower 23.4 PS (17.2 kW; 23.0 HP) at 3,000 rpm
Starter Electric
Oil type: John Deere PLUS-4 or PLUS-50
Oil capacity: 2.0 L (2.11 US. qt, 1.76 Imp. qt.)
Coolant capacity: 2.9 L (3.06 US. qt, 2.55 Imp. qt.)

Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Power
Brakes Wet disc
Final drive Spur gear
Differential lock Mechanical rear
Front axle 2.5 L (2.64 US qts, 2.2 Imp. qts)
Transmission model
Transmission type Hydrostatic
Gears Infinite (2-range) forward and reverse
Speed Forward: 13.7 kmh (8.5 mph) Reverse: 13.7 (8.5 mph)
Transmission oil type John Deere Low Viscosity HY-GARD (J20D)
Transmission oil capacity 13.0 L (3.4 US. gal, 2.9 Imp. gal.)
Front tires Ag: 18×8.50-10
Rear tires Ag: 26×12.00-12

Three-Point Hitch
Caterogy I
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Middle PTO type Independent
Middle PTO spped 2,100 rpm
Rear PTO type Independent with hydraulic wet disc clutch
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 13.0 L (13.74 US. qt, 11.44 Imp. qt.)
Pressure 1,987 psi (137 bar)
Valves 2
Pump flow 3.0 gpm (11.4 lpm)
Steering flow 2.5 gpm (9.5 lpm)
Total flow 5.5 gpm (20.8 lpm)

Maybe that’s all the information about the John Deere 2210 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment