John Deere 2240 (1980-1982)

Specifications and review tractor John Deere 2240 (1980-1982) Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 2240 (1980-1982)The John Deere 2240 is a 2WD or 4WD utility tractor from the 2040 series. This tractor was manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1976 to 1982. This second version was produced from 1980 to 1982. The JD 2240 is equipped with a 2.9 L (179.0 cu·in) three-cylinder diesel engine and one of three transmissions: a partially synchronized transmission with 8 forward and 4 reverse gears, a two-speed power shift transmission with 16 forward and 8 reverse gears, or a power shuttle transmission with 8 forward and 8 reverse gears.

The JD 2240 utility tractor used the John Deere 3179DL engine. It is a 2.9 L, 2,933 cm2, (179.0 cu·in) three-cylinder natural aspirated diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 16.2:1. This engine produced 50.7 PS (37.3 kW; 50.0 HP) at 2,500 rpm of output power.

The John Deere 2240 is equipped with power assist steering, hydraulic wet disc brakes, an open operator station, and 62.5 liters (16.5 US gal.; 13.7 Imp. gal) fuel tank.


John Deere 2240 Specifications

General Specifications
Model John Deere 2240
Length 3,210 mm (126.4 in)
Width 1,600 mm (63 in)
Height 1,980 mm (78 in)
Wheel base straight a: 2,040 mm (80.3 in)
swept axle: 1,880 mm (74 in)
Ground clearance 520 mm (20.5 in)
Weight (operating) 2,245 kg (4,949 lbs)
Fuel tank capacity 62.5 liters (16.5 US gal.; 13.7 Imp. gal)
Battery One or two 12V
Cabin type Open operator station
Engine
Engine model John Deere 3179DL
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.9 L, 2,933 cm2, (179.0 cu·in)
Bore and stroke 106.0 mm X 110.0 mm (4.17 in X 4.33 in)
Compression ratio 16.2:1
Horsepower 50.7 PS (37.3 kW; 50 HP) at 2,500 rpm
Starter Electric
Coolant capacity: 2.6 L (2.7 US. qt, 2.3 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power assist
Brakes Hydraulic wet disc
Final drive Planetary
Differential lock Mechanical rear
Transmission model Top-Shaft Synchronized (TSS)
Transmission type Partially synchronized
Gears 8 forward and 4 reverse
Speed Forward: 27.4 kmh (17 mph) Reverse: 12.3 kmh (7.6 mph)
Transmission model TSS Hi-Lo
Transmission type Two-speed power shift
Gears 16 forward and 8 reverse
Speed Forward: 28.3 kmh (17.6 mph) Reverse: 8.4 kmh (5.2 mph)
Transmission model Direction Reverser
Transmission type Power shuttle
Gears 8 forward and 8 reverse
Tires
Front tires Ag: 6.50-16 (2WD), 9.5-24 (4WD)
Rear tires Ag: 14.9-29 (2WD), 16.9-28 (4WD)

Three-Point Hitch
Category II
Control type Position control and lower-link draft sensing
Lift capacity (at 610 mm/24 in) 1,090 kg (2,400 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent or live
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Closed center
Pressure 2250 psi (155.1 bar)
Valves 1 or 2
Pump flow 13.0 gpm (49.2 lpm)

Maybe that’s all the information about the John Deere 2240 (1980-1982) tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment