Specifications and review tractor John Deere 2305 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The John Deere 2305 is a 4WD sub-compact utility tractor from the 2000 Twenty series. This tractor was manufactured by John Deere in Augusta, Georgia, USA from 2006 to 2011. The JD 2305 is equipped with 1.1 L three-cylinder diesel engine and hydrostatic transmission with infinite (2-range) forward and reverse gears.
The John Deere 2305 utility tractor used the Yanmar 3TNV76 engine. It is a 1.1 L, 1,116 cm2, (68 cu·in) three-cylinder natural aspirated diesel engine with 76.0 mm (2.99 in) of the cylinder bore and 82.0 mm (3.23 in) of the piston stroke. The compression ratio rating is 23.4:1. This engine produced 24.5 PS (18.0 kW; 24.0 HP) at 3,000 rpm of maximum horsepower and 56.5 N·m (5.8 kg·m, 41.6 ft·lb) at 3,000 rpm of torque. The Yanmar 3TNV76 motor has an indirect injection fuel system with an inline ML fuel injection pump; pressurized lubrication system with the trochoid oil pump, oil pressure switch and paper element oil filter and dual dry element air cleaner.
The John Deere 2305 is equipped with hydrostatic power steering, wet disc brakes, open operator station with two-post ROPS (rollover protection structure) and 21.0 liters (5.5 US gal.; 4.6 Imp. gal) fuel tank.
Following attachments are available for JD 2305 sub-compact utility tractor:
- John Deere 54C: 54 in (1,370 mm) mower deck with 3-blades
- John Deere 62C: 62 in (1,570 mm) mower deck with 3-blades
- John Deere 200CX loader
|
John Deere 2305 Specifications
General Specifications | |
Model | John Deere 2305 |
Length | 2,605 mm (102.6 in) |
Width | 1,140 mm (44.9 in) |
Height | 1,970 mm (77.6 in) |
Wheel base | 1,450 mm (57.1 in) |
Weight | 846 kg (1,865 lbs) |
Fuel tank capacity | 21.0 liters (5.5 US gal.; 4.6 Imp. gal) |
Battery | 12V CCA: 500A |
Cabin type | Open operator station with two-post ROPS |
Engine | |
Engine model | Yanmar 3TNV76 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 1.1 L, 1,116 cm2, (68 cu·in) |
Bore and stroke | 76.0 mm X 82.0 mm (2.99 in X 3.23 in) |
Compression ratio | 23.4:1 |
Horsepower | 24.5 PS (18.0 kW; 24.0 HP) at 3,000 rpm |
Torque | 56.5 N·m (5.8 kg·m, 41.6 ft·lb) at 3,000 rpm |
Starter | Electric |
Oil capacity: | 3.2 L (3.38 US. qt, 2.82 Imp. qt.) |
Coolant capacity: | 3.2 L (3.38 US. qt, 2.82 Imp. qt.) |
|
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Hydrostatic power |
Brakes | Wet disc |
Final drive | Spur gear |
Transmission model | – |
Transmission type | Hydrostatic |
Gears | Infinite (2-range) forward and reverse |
Speed | Forward: 13.4 kmh (8.3 mph) Reverse: 6.6 (4.1 mph) |
Transmission oil capacity | 12.9 L (13.63 US. qt, 11.35 Imp. qt.) |
Tires | |
Front tires | Lawn/turf/ind: 18×8.5-10 |
Rear tires | Lawn/turf/ind: 26×12.00-12 |
|
Three-Point Hitch | |
Caterogy | I Limited |
Control type | – |
Lift capacity | 650 kg (1,433 lbs) |
PTO (Power take-off shaft) | |
Middle PTO type | Independent |
Middle PTO spped | 2,100 rpm |
Rear PTO type | Independent |
Rear PTO spped | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Hydraulic capacity | 12.9 L (13.63 US. qt, 11.35 Imp. qt.) |
Pressure | 1990 psi (137.2 bar) |
Valves | 2 |
Pump flow | 2.9 gpm (11 lpm) |
Total flow | 5.2 gpm (19.7 lpm) |
Steering flow | 2.3 gpm (8.7 lpm) |
Maybe that’s all the information about the John Deere 2305 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you