John Deere 2355

Specifications and review tractor John Deere 2355 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 2355The John Deere 2355 is a 2WD or 4WD utility tractor from the 55 Utility series. This tractor was manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1987 to 1992. The John Deere 2355 is equipped with a 3.9 L (239.0 cu·in) four-cylinder diesel engine and one of four transmissions: a non-synchronized transmission with 8 forward and 4 reverse gears, a partially synchronized transmission with 8 forward and 4 reverse gears, a partial power shift transmission with 16 forward and 8 reverse gears or a power shuttle transmission with 8 forward and 8 reverse gears.

The JD 2355 utility tractor used the John Deere engine. It is a 3.9 L, 3,917 cm2, (239.0 cu·in) four-cylinder natural aspirated diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 17.8:1. This engine produced 64.9 PS (47.7 kW; 64.0 HP) at 2,300-2,500 rpm of output power.

The John Deere 2355 is equipped with power or hydrostatic power steering, differential hydraulic wet disc brakes, Roll-Gard ROPS, or Sound-Gard cab (optional), and 84.0 liters (22.2 US gal.; 18.5 Imp. gal) fuel tank.


John Deere 2355 Specifications

General Specifications
Model John Deere 2355
Length
Width
Height
Wheel base 2,270 mm (89.4 in)
Ground clearance
Weight (shipping) 2WD with ROPS: 2,705 kg (5,965 lbs)
2WD with Cab: 3,150 kg (6,945 lbs)
4WD with ROPS: 3,010 kg (6,635 lbs)
4WD with Cab: 3,425 kg (7,550 lbs)
Fuel tank capacity 84.0 liters (22.2 US gal.; 18.5 Imp. gal)
Battery 12V, CCA 400A
Cabin type Roll-Gard ROPSor Sound-Gard cab (optional)
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.9 L, 3,917 cm2, (239.0 cu·in)
Bore and stroke 106.0 mm X 110.0 mm (4.17 in X 4.33 in)
Compression ratio 17.8:1
Horsepower 64.9 PS (47.7 kW; 64.0 HP) at 2,300-2,500 rpm
Starter Electric
Oil capacity: 10.0 L (10.6 US. qt, 8.8 Imp. qt.)
Coolant capacity: 13.0 L (13.7 US. qt, 11.4 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power or hydrostatic power
Brakes Differential hydraulic wet disc
Transmission model John Deere Collar Shift (CST)
Transmission type Non-synchronized
Gears 8 forward and 4 reverse
Transmission model John Deere Top-Shaft Synchronized (TSS)
Transmission type Partially synchronized
Gears 8 forward and 4 reverse
Speed Forward: 26.4 kmh (16.4 mph) Reverse: 7.9 (4.9 mph)
Transmission model John Deere Hi-Lo Top-Shaft Synchronized (TSS)
Transmission type Partial power shift
Gears 16 forward and 8 reverse
Transmission model John Deere Collar Shift Reverser
Transmission type Power shuttle
Gears 8 forward and 8 reverse
Tires
Front tires Ag: 6.50-16
Rear tires Ag: 16.9-28

Three-Point Hitch
Caterogy II/I
Control type
Lift capacity (at ends) 1,480 kg (3,260 lbs)
Front hitch
Caterogy II
Lift capacity (at ends) 1,530 kg (3,370 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent or live
Rear PTO speed 540, 540/1,000 rpm
Hydraulic system
Hydraulic type Closed center
Pressure 2250 psi (155.1 bar)
Valves 1 to 3
Total flow 13.0 gpm (49.2 lpm)
23.0 gpm (87.1 lpm)

Maybe that’s all the information about the John Deere 2355 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment