John Deere 2550

Specifications and review tractor John Deere 2550 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 2550The John Deere 2550 is a 2WD or 4WD utility tractor from the 2050 series. This tractor was manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1983 to 1986. The John Deere 2550 is equipped with a 3.9 L (239.0 cu·in) four-cylinder diesel engine and one of three transmissions: a partially synchronized transmission with 8 forward and 4 reverse gears, a partial power shift transmission with 16 forward and 8 reverse gears or a power shuttle transmission with 8 forward and reverse gears.

The JD 2550 utility tractor used the John Deere engine. It is a 3.9 L, 3,917 cm2, (239.0 cu·in) four-cylinder natural aspirated diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 17.4:1. This engine produced 73 PS (53.7 kW; 72.0 HP) at 2,500 rpm of output power.

The John Deere 2550 is equipped with hydrostatic power steering, differential hydraulic wet disc brakes, two-post ROPS or Sound-Gard cab, and 91.0 liters (24 US gal.; 20 Imp. gal) fuel tank.

Following attachments are available for the JD 2550 utility tractor:

  • John Deere 146 loader
  • John Deere 175 loader
  • John Deere 240 loader
  • John Deere 245 loader

John Deere 2550 Specifications

General Specifications
Model John Deere 2550
Length 3,380 mm (133.1 in)
Width
Height (Cab) 2,570 mm (101.2 in)
Wheel base 2WD: 2,260 mm (89.0 in)
2WD: 2,280 mm (90.0 in)
Ground clearance 2WD: 620 mm (24.4 in)
2WD: 440 mm (17.5 in)
Weight (ballasted) 3,850 kg (8,490 lbs)
Fuel tank capacity 91.0 liters (24 US gal.; 20 Imp. gal)
Battery 12V
Cabin type Two-post ROPS or Sound-Gard cab
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.9 L, 3,917 cm2, (239.0 cu·in)
Bore and stroke 106.0 mm X 110.0 mm (4.17 in X 4.33 in)
Compression ratio 17.4:1
Horsepower 73 PS (53.7 kW; 72.0 HP) at 2,500 rpm
Starter Electric
Coolant capacity: 12.9 L (13.6 US. qt, 11.4 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Differential hydraulic wet disc
Final drive Differential lock: rear standard
Transmission model Top-Shaft Synchronized
Transmission type Partially synchronized
Gears 8 forward and 4 reverse
Speed Forward: 27.3 kmh (17 mph) Reverse: 12.2 (7.6 mph)
Transmission model Hi-Lo Top-Shaft Synchronized
Transmission type Partial power shift
Gears 16 forward and 8 reverse
Speed Forward: 28.6 kmh (17.8 mph) Reverse: 12.9 (8 mph)
Transmission model Direction Reverser
Transmission type Power shuttle
Gears 8 forward and reverse
Tires
Front tires Ag: 7.50-16 (2WD), 11.2-24 (4WD)
Rear tires Ag: 16.9-30

Three-Point Hitch
Caterogy II/I
Control type Load and depth control
Lift capacity (at ends) 1,240 kg (2,735 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent or live (with reverser)
Rear PTO speed 540, 540/1,000 rpm
Hydraulic system
Hydraulic type Closed center
Pressure 2300 psi (158.6 bar)
Valves 1 or 2
Pump flow 13.0 gpm (49.2 lpm)

Maybe that’s all the information about the John Deere 2550 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment