John Deere 2750

Specifications and review tractor John Deere 2750 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 2750The John Deere 2750 is a 2WD or 4WD utility tractor from the 2050 series. This tractor was manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1983 to 1986. The John Deere 2750 is equipped with a 3.9 L (239.0 cu·in) four-cylinder diesel engine and one of three transmissions: a partially synchronized transmission with 8 forward and 4 reverse gears, a partial powershift transmission with 16 forward and 8 reverse gears or a partially synchronized transmission with 12 forward and 8 reverse gears.

The JD 2750 utility tractor used the John Deere engine. It is a 3.9 L, 3,916 cm2, (239.0 cu·in) four-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 16.8:1. This engine produced 76 PS (55.9 kW; 75.0 HP) at 2,500 rpm of PTO output power.

The John Deere 2750 is equipped with hydrostatic power steering, differential hydraulic wet disc brakes, two-post ROPS, or Sound-Gard cab with available heat and air-conditioning, and 98.5 liters (26 US gal.; 21.7 Imp. gal) fuel tank.

Following attachments are available for the JD 2750 utility tractor:

  • John Deere 146 loader
  • John Deere 175 loader
  • John Deere 240 loader
  • John Deere 245 loader

John Deere 2750 Specifications

General Specifications
Model John Deere 2750
Length 2WD: 3,520 mm (138.6 in)
4WD: 3,470 mm (136.9 in)
Width
Height (Cab) 2,590 mm (102 in)
Wheel base 2WD: 2,260 mm (89.2 in)
4WD: 2,280 mm (90.0 in)
Ground clearance (front axle) 2WD: 620 mm (24.4 in)
2WD: 480 mm (18.9 in)
Weight 2WD with Cab: 3,725 kg (8,210 lbs)
4WD with Cab: 4,040 kg (8,910 lbs)
Fuel tank capacity 98.5 liters (26 US gal.; 21.7 Imp. gal)
Battery 12V
Cabin type Two-post ROPS or Sound-Gard cab with available heat and air-conditioning.
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.9 L, 3,916 cm2, (239.0 cu·in)
Bore and stroke 106.0 mm X 110.0 mm (4.17 in X 4.33 in)
Compression ratio 16.8:1
Horsepower 76 PS (55.9 kW; 75.0 HP) at 2,500 rpm
Starter Electric
Coolant capacity: 3.2 L (3.4 US. qt, 2.8 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Differential hydraulic wet disc
Differential lock Rear standard
Transmission model John Deere Top-Shaft Synchronized
Transmission type Partially synchronized
Gears 8 forward and 4 reverse
Speed Forward: 28.0 kmh (17.4 mph) Reverse: 12.6 (7.8 mph)
Transmission model John Deere Hi-Lo Top-Shaft Synchronized
Transmission type Partial powershift
Gears 16 forward and 8 reverse
Speed Forward: 28.3 kmh (17.6 mph) Reverse: 12.7 (7.9 mph)
Transmission model John Deere TSS Creeper
Transmission type Partially synchronized
Gears 12 forward and 8 reverse
Tires
Front tires Ag: 7.50-16 (2WD), 13.6-24 (4WD)
Rear tires Ag: 18.4-30 (2WD), 15.5-38 (4WD)

Three-Point Hitch
Caterogy II/I
Control type Load and depth control
Lift capacity (at ends) 1,495 kg (3,295 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540, 540/1,000 rpm
Hydraulic system
Hydraulic type Closed center
Pressure 50.0 psi (3.4 bar)
Valves 1 or 2
Pump flow 23.0 gpm (87.1 lpm)

Maybe that’s all the information about the John Deere 2750 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment