Specifications and review tractor John Deere 2755 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The John Deere 2755 is a 2WD or 4WD utility tractor from the 55 Utility series. This tractor was manufactured by John Deere in Mannheim, Baden-Württemberg, Germany, and Saltillo, Mexico from 1984 to 1992. The John Deere 2755 is equipped with a 3.9 L (239.0 cu·in) four-cylinder diesel engine and one of two transmissions: a partially synchronized transmission with a dry disc clutch and 8 forward and 4 reverse gears or a partial power shift transmission with 16 forward and 8 reverse gears.
The John Deere 2755 utility tractor used the John Deere engine. It is a 3.9 L, 3,917 cm2, (239.0 cu·in) four-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 17.8:1. This engine produced 89.2 PS (65.6 kW; 88.0 HP) at 2,300 rpm of output power.
The JD 2755 is equipped with power or hydrostatic power steering, differential hydraulic wet disc brakes, Roll-Gard ROPS or Sound-Gard cab and 84.0 liters (22.2 US gal.; 18.5 Imp. gal) fuel tank.
|
John Deere 2755 Specifications
General Specifications | |
Model | John Deere 2755 |
Length | – |
Width | – |
Height | – |
Wheel base | 2,260 mm (89 in) |
Weight |
2WD with ROPS: 2,840 kg (6,260 lbs) 2WD with Cab: 3,265 kg (7,200 lbs) 4WD with ROPS: 3,235 kg (7,135 lbs) 4WD with Cab: 3,715 kg (8,190 lbs) |
Fuel tank capacity | 84.0 liters (22.2 US gal.; 18.5 Imp. gal) |
Battery | Two 12V, CCA 400A |
Cabin type | Roll-Gard ROPS or Sound-Gard cab |
Engine | |
Engine model | John Deere |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 3.9 L, 3,917 cm2, (239.0 cu·in) |
Bore and stroke | 106.0 mm X 110.0 mm (4.17 in X 4.33 in) |
Compression ratio | 17.8:1 |
Horsepower | 89.2 PS (65.6 kW; 88.0 HP) at 2,300 rpm |
Starter | Electric |
Oil capacity: | 10.0 L (10.6 US. qt, 8.8 Imp. qt.) |
Coolant capacity: | 13.0 L (13.7 US. qt, 11.4 Imp. qt.) |
|
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Power or hydrostatic power |
Brakes | Differential hydraulic wet disc |
Transmission model | John Deere Top-Shaft Synchronized (TSS) |
Transmission type | Partially synchronized with dry disc clutch |
Gears | 8 forward and 4 reverse |
Speed | Forward: 23.8 kmh (14.8 mph) Reverse: 7.9 (4.9 mph) |
Transmission model | John Deere Hi-Lo Top-Shaft Synchronized (TSS) |
Transmission type | Partial power shift |
Gears | 16 forward and 8 reverse |
Speed | Forward: 23.8 kmh (14.8 mph) Reverse: 7.9 (4.9 mph) |
Transmission model | |
Transmission type | John Deere Top-Shaft Synchronized Creeper |
Gears | 12 forward and 8 reverse |
Tires | |
Front tires | Ag: 7.50-18 |
Rear tires | Ag: 16.9-24 |
|
Three-Point Hitch | |
Caterogy | II/I |
Control type | – |
Lift capacity (at ends) | 1,690 kg (3,720 lbs) |
Front Hitch | |
Caterogy | II (optional) |
Lift capacity (at ends) | 1,530 kg (3,370 lbs) |
PTO (Power take-off shaft) | |
Front PTO type | Independent |
Front PTO speed | 1,000 rpm |
Rear PTO type | Independent |
Rear PTO speed | 540 or 540/1,000 rpm (optional) |
Hydraulic system | |
Hydraulic type | Closed center |
Hydraulic capacity | 42.4 L (44.8 US. qt, 37.31 Imp. qt.) |
Pressure | 2320 psi (160 bar) |
Valves | 1 to 3 |
Pump flow | 13.0 gpm (49.2 lpm) |
Total flow | 21.0 gpm (79.5 lpm) |
Maybe that’s all the information about the John Deere 2755 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you