John Deere 2950

Specifications and review tractor John Deere 2950 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 2950The John Deere 2950 is a 2WD or 4WD utility tractor from the 2050 series. This tractor was manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1983 to 1988. The John Deere 2950 is equipped with a 5.9 L (359.0 cu·in) six-cylinder diesel engine and one of two transmissions: a partial power shift transmission with 16 forward and 8 reverse gears or a partially synchronized transmission with 12 forward and 8 reverse gears.

The John Deere 2950 utility tractor used the John Deere engine. It is a 5.9 L, 5,883 cm2, (359.0 cu·in) six-cylinder natural aspirated diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 17.4:1. This engine produced 86.2 PS (63.4 kW; 85.0 HP) at 2,500 rpm of PTO output power.

The JD 2950 is equipped with power steering, differential hydraulic wet disc brakes, two-post ROPS (canopy or Sound-Gard cab with heat and air-conditioning was available as an option), and 122.3 liters (32.3 US gal.; 26.9 Imp. gal) fuel tank.

Following attachments are available for the JD 2950 utility tractor:

  • John Deere 148 loader
  • John Deere 260 loader
  • John Deere 265 loader

John Deere 2950 Specifications

General Specifications
Model John Deere 2950
Length 3,890 mm (153.1 in)
Width
Height (Cab) 2,700 mm (106.3 in)
Wheel base 2WD: 2,550 mm (100.4 in)
4WD: 2,580 mm (101.6 in)
Weight (ballasted) 5,010 kg (11,045 lbs)
Fuel tank capacity 122.3 liters (32.3 US gal.; 26.9 Imp. gal)
Battery 12V
Cabin type Two-post ROPS, Canopy or Sound-Gard cab with heat and air-conditioning
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 5.9 L, 5,883 cm2, (359.0 cu·in)
Bore and stroke 106.0 mm X 110.0 mm (4.17 in X 4.33 in)
Compression ratio 17.4:1
Horsepower 86.2 PS (63.4 kW; 85.0 HP) at 2,500 rpm
Starter Electric
Coolant capacity: 18.9 L (20 US. qt, 16.6 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Differential hydraulic wet disc
Differential lock Rear standard
Transmission model John Deere Hi-Lo TSS
Transmission type Partial power shift
Gears 16 forward and 8 reverse
Speed Forward: 27.9 kmh (17.3 mph) Reverse: 12.5 (7.8 mph)
Transmission model John Deere TSS Creeper
Transmission type Partially synchronized
Gears 12 forward and 8 reverse
Speed Forward: 27.9 kmh (17.3 mph) Reverse: 12.5 (7.8 mph)
Tires
Front tires Ag: 10.00-16 (2WD), 13.6-24.8 (4WD)
Rear tires Ag: 18.4-34

Three-Point Hitch
Caterogy II
Control type Load and depth control
Lift capacity (at ends) 2,210 kg (4,875 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1,000 rpm
Hydraulic system
Hydraulic type Closed center
Valves 2
Pump flow 23.0 gpm (87.1 lpm)

Maybe that’s all the information about the John Deere 2950 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment