John Deere 3005

Specifications and review tractor John Deere 3005 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 3005The John Deere 3005 is a 2WD/4WD compact utility tractor from the 3000 series. This tractor was manufactured by the John Deere in Augusta, Georgia, USA from 2008 to 2018. The JD 3005 is equipped with a 1.3 L three-cylinder diesel engine and sliding gear transmission with 8 forward and 2 reverse gears.

The John Deere 3005 compact utility tractor used the Yanmar 3TNV82A engine. It is a 1.3 L, 1,331 cm2, (81.2 cu·in) three-cylinder natural aspirated diesel engine with 82.0 mm (3.23 in) of the cylinder bore and 84.0 mm (3.31 in) of the piston stroke. The compression ratio rating is 18.1:1. This engine produced 27.2 PS (20.0 kW; 27.0 HP) at 2,700 rpm of maximum output power.

The JD 3005 is equipped with manual or power (optional) steering, dry shoe brakes, open operator station with two-post ROPS and 24.0 liters (6.3 US gal.; 5.3 Imp. gal) fuel tank.

John Deere 3005 Specifications

General Specifications
Model John Deere 3005
Length 2,230 mm (87.8 in)
Width 1,370 mm (53.9 in)
Height 2,080 mm (81.9 in)
Wheel base 1,550 mm (61 in)
Weight (max) 1,480 kg (3,262 lbs)
Fuel tank capacity 24.0 liters (6.3 US gal.; 5.3 Imp. gal)
Battery 12V, CCA 500A
Cabin type Open operator station with two-post ROPS
Engine model Yanmar 3TNV82A
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.3 L, 1,331 cm2, (81.2 cu·in)
Bore and stroke 82.0 mm X 84.0 mm (3.23 in X 3.31 in)
Compression ratio 18.1:1
Horsepower 27.2 PS (20.0 kW; 27.0 HP) at 2,700 rpm
Starter Electric
Oil capacity: 2.8 L (3 US. qt, 2.5 Imp. qt.)
Coolant capacity: 4.7 L (5 US. qt, 4.1 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Manual or power (optional)
Brakes Dry shoe
Front axle gear case (MFWD) 3.0 L (3.2 US.qts, 2.6 Imp. qts)
Transmission model
Transmission type Sliding gear
Gears 8 forward and 2 reverse
Speed Forward: 20.5 kmh (12.7 mph) Reverse: 5.8 (3.6 mph)
Transmission oil capacity 15.0 L (4 US. gal, 3.3 Imp. gal.)
Front tires Ag: 5.00-15 (2WD), 7.00-14 (4WD)
Rear tires Ag: 11.2-24

Three-Point Hitch
Caterogy I
Control type
Lift capacity (at 610 mm / 24 in) 370 kg (816 lbs)
PTO (Power take-off shaft)
Middle PTO type Optional
Middle PTO spped 2,000 rpm
Rear PTO type Live with two stage clutch
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 15.0 L (15.85 US. qt, 13.2 Imp. qt.)
Pressure 2,050 psi (141 bar)
Valves 2
Pump flow 5.8 gpm (22 lpm)
Steering flow 4.5 gpm (17 lpm)
Total flow 10.3 gpm (39 lpm)

Maybe that’s all the information about the John Deere 3005 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment