John Deere 3050

Specifications and review tractor John Deere 3050 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 3050The John Deere 3050 is a 2WD or 4WD utility tractor from the 3050 series. This tractor was manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1986 to 1993. The John Deere 3050 is equipped with a 5.9 L (358.9 cu·in) six-cylinder diesel engine and a two-speed power shift transmission with 16 forward and 8 reverse gears.

The John Deere 3050 utility tractor used the John Deere 6359 DL008 engine. It is a 5.9 L, 5,882 cm2, (359.0 cu·in) six-cylinder natural aspirated diesel engine with 107.0 mm (4.21 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 17.4:1. This engine produced 91.9 PS (67.6 kW; 90.7 HP) at 2,300 rpm of output power and 340.1 N·m (34.7 kg·m, 250.7 ft·lb) at 1,400 rpm of torque.

The JD 3050 is equipped with power steering, hydraulic wet disc brakes, SG2 Cab (standard), and 121.1 liters (32 US gal.; 26.6 Imp. gal) fuel tank.

John Deere 3050 Specifications

General Specifications
Model John Deere 3050
Length 4,670 mm (183.9 in)
Width 2,160 mm (85 in)
Height 2,880 mm (113.4 in)
Wheel base 2WD: 2,550 mm (100.4 in)
4WD: 2,580 mm (101.6 in)
Ground clearance 2WD: 680 mm (26.8 in)
4WD: 500 mm (19.7 in)
Weight 2WD: 4,150 kg (9,149 lbs)
4WD: 4,860 kg (10,714 lbs)
Fuel tank capacity Standard: 121.1 liters (32.0 US gal.; 26.6 Imp. gal)
Optional: 173.0 liters (45.7 US gal.; 38.1 Imp. gal)
Battery Two 12V, 88Ah
Cabin type SG2 Cab (standard) with optional air-conditioning.
Engine model John Deere 6359 DL008
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 5.9 L, 5,882 cm2, (359.0 cu·in)
Bore and stroke 107.0 mm X 110.0 mm (4.21 in X 4.33 in)
Compression ratio 17.4:1
Horsepower 91.9 PS (67.6 kW; 90.7 HP) at 2,300 rpm
Torque 340.1 N·m (34.7 kg·m, 250.7 ft·lb) at 1,400 rpm
Starter Electric
Oil capacity: 11.5 L (12.2 US. qt, 10.1 Imp. qt.)
Coolant capacity: 19.0 L (20.1 US. qt, 16.7 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Hydraulic wet disc
Final drive Planetary
Differential lock Mechanical rear
Transmission model Hi-Lo
Transmission type Two-speed power shift with hydraulic cerametallic disc clutch
Gears 16 forward and 8 reverse
Speed Forward: 28.9 kmh (18 mph) Reverse: 12.5 kmh (7.8 mph)
Front tires Ag: 11.00×16 (2WD), 13.6×28 (4WD)
Rear tires Ag: 18.4×38

Three-Point Hitch
Category II/IIIN
Control type Position and draft control
Lift capacity (at ends) 2WD: 4,075 kg (8,900 lbs)
4WD: 4,890 kg (10,800 lbs)
Front Hitch II
Front lift 1,630 kg (3,595 lbs)
PTO (Power take-off shaft)
Front PTO type Independent with hydraulic wet disc clutch
Front PTO speed 1000 rpm
Rear PTO type Independent with hydraulic wet disc clutch
Rear PTO speed 540/1000 rpm
Hydraulic system
Hydraulic type Closed-center constant pressure
Hydraulic capacity 2WD: 49.0 L (12.9 US. gal, 10.8 Imp. gal.)
4WD: 52.0 L (13.7 US. gal, 11.4 Imp. gal.)
Pressure 2698 psi (186 bar)
Total flow 11.62 gpm (44 lpm)

Maybe that’s all the information about the John Deere 3050 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment