Specifications and review tractor John Deere 4055 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The John Deere 4055 is a 2WD or 4WD row-crop tractor from the 4055 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1988 to 1992. The John Deere 4055 is equipped with a 7.6 L (466.0 cu·in) six-cylinder diesel engine and one of two transmissions: a partial power shift transmission with 16 forward and 6 reverse gears and hydraulic wet disc clutch or a full powershift transmission with 15 forward and 4 reverse gears and hydraulic wet disc clutch .
The JD 4055 row-crop tractor used the John Deere engine. It is a 7.6 L, 7,637 cm2, (466.0 cu·in) six-cylinder turbocharged diesel engine with 116.0 mm (4.57 in) of the cylinder bore and 121.0 mm (4.76 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 118.6 PS (87.2 kW; 117.0 HP) at 2,200 rpm of output power.
The John Deere 4055 is equipped with power steering, differential hydraulic wet disc brakes, Sound-Gard cab, and 246.0 liters (65 US gal.; 54.1 Imp. gal) fuel tank.
Following attachments are available for the JD 4055 row-crop tractor:
John Deere 265 loader
John Deere 280 loader (for 4WD version)
John Deere 840 loader
John Deere 4055 Specifications
General Specifications
Model
John Deere 4055
Length
4,020 mm (158.3 in)
Width
2,430 mm (95.7 in)
Height
Cab: 2,950 mm (116.1 in)
Wheel base
2WD: 2,710 mm (106.7 in) 4WD: 2,670 mm (105.1 in)
Weight (shipping)
2WD Quad-range: 5,500 kg (12,125 lbs) 4WD Powershift: 6,330 kg (13,955 lbs)
Fuel tank capacity
246.0 liters (65 US gal.; 54.1 Imp. gal)
Battery
Two 12V, CCA 925A
Cabin type
Sound-Gard cab
Engine
Engine model
John Deere
Engine type
Four-stroke, liquid-cooled, inline
Cylinders
6
Fuel type
Diesel
Displacement
7.6 L, 7,637 cm2, (466.0 cu·in)
Bore and stroke
116.0 mm X 121.0 mm (4.57 in X 4.76 in)
Compression ratio
16.0:1
Horsepower
118.6 PS (87.2 kW; 117.0 HP) at 2,200 rpm
Starter
Electric
Oil capacity:
18.0 L (19 US. qt, 15.8 Imp. qt.)
Coolant capacity:
25.6 L (27.1 US. qt, 22.5 Imp. qt.)
Transmission and chassis
Chassis
4×2 2WD or 4×4 MFWD 4WD
Steering type
Power
Brakes
Differential hydraulic wet disc
Final drive
Inboard planetary
Transmission model
John Deere Quad Range
Transmission type
Partial power shift with hydraulic wet disc clutch
2WD: 51.0 L (13.5 US. gal, 11.2 Imp. gal.) 4WD: 60.0 L (15.9 US. gal, 13.2 Imp. gal.)
Tires
Front tires
Ag: 10.00-16 (2WD), 14.9-26 (4WD)
Rear tires
Ag: 18.4-38
Three-Point Hitch
Category
II
Control type
–
Lift capacity (at ends)
2,495 kg (5,500 lbs)
3,300 kg (7,280 lbs)
PTO (Power take-off shaft)
Rear PTO type
Independent with hydraulic clutch
Rear PTO speed
540/1000 rpm
Hydraulic system
Hydraulic type
Closed center
Pressure
2530 psi (174.4 bar)
Valves
2 or 3
Pump flow
26.5 gpm (100.3 lpm)
SCV flow
20.6 gpm (78 lpm)
Maybe that’s all the information about the John Deere 4055 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you
The John Deere 4055 is a 2WD or 4WD row-crop tractor from the 4055 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1988 to 1992. The John Deere 4055 is equipped with a 7.6 L (466.0 cu·in) six-cylinder diesel engine and one of two transmissions: a partial power shift transmission with 16 forward and 6 reverse gears and hydraulic wet disc clutch or a full powershift transmission with 15 forward and 4 reverse gears and hydraulic wet disc clutch .
