John Deere 4240

Specifications and review tractor John Deere 4240 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 4240The John Deere 4240 is a 2WD or 4WD row-crop tractor from the Iron Horses series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1978 to 1982. The JD 4240 is equipped with a 7.6 L (466.0 cu·in) six-cylinder diesel engine and one of three transmissions: a partial power shift transmission with 16 forward and 6 reverse gears, a full powershift transmission with 8 forward and 4 reverse gears or a partially synchronized transmission with 8 forward and 2 reverse gears (13 forward and 5 reverse for the version with creeper).

The JD 4240 row-crop tractor used the John Deere engine. It is a 7.6 L, 7,636 cm2, (466.0 cu·in) six-cylinder natural aspirated diesel engine with 116.0 mm (4.57 in) of the cylinder bore and 121.0 mm (4.76 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 111.5 PS (82.0 kW; 110.0 HP) at 2,200 rpm of PTO output power.

The John Deere 4240 is equipped with power steering, differential hydraulic wet disc brakes, Sound-Gard cab standard and 174.0 liters (46 US gal.; 38.3 Imp. gal) fuel tank.

Following attachments are available for the JD 4240 row-crop tractor:

  • John Deere 148 loader
  • John Deere 158 loader

John Deere 4240 Specifications

General Specifications
Model John Deere 4240
Length 3,970 mm (156.3 in)
Width 2,430 mm (95.7 in)
Long axle: 2,870 mm (113 in)
Height
Wheel base 2,700 mm (106.3 in)
Ground clearance front axle: 560 mm (22 in)
rear axle: 680 mm (26.8 in)
Weight (operating) 5,620 kg (12,390 lbs)
Fuel tank capacity 174.0 liters (46 US gal.; 38.3 Imp. gal)
Battery Two 6V, CCA 850A
Cabin type Sound-Gard cab standard
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 7.6 L, 7,636 cm2, (466.0 cu·in)
Bore and stroke 116.0 mm X 121.0 mm (4.57 in X 4.76 in)
Compression ratio 17.0:1
Horsepower 111.5 PS (82.0 kW; 110.0 HP) at 2,200 rpm
Starter Electric
Oil capacity: 16.1 L (17 US. qt, 14.2 Imp. qt.)
Coolant capacity: 28.4 L (30 US. qt, 25 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 HFWD 4WD
Steering type Power
Brakes Differential hydraulic wet disc
Differential lock Pedal-actuated hydraulic
Transmission model John Deere Quad-Range
Transmission type Partial power shift
Gears 16 forward and 6 reverse
Speed Forward: 28.6 kmh (17.8 mph) Reverse: 18.0 kmh (11.2 mph)
Transmission oil capacity 58.7 L (15.5 US. gal, 12.9 Imp. gal.)
Transmission model John Deere PowerShift
Transmission type Full power shift
Gears 8 forward and 4 reverse
Speed Forward: 29.0 kmh (18 mph) Reverse: 9.5 kmh (5.9 mph)
Transmission oil capacity 51.1 L (13.5 US. gal, 11.2 Imp. gal.)
Transmission model John Deere Syncro-Range
Transmission type Partially synchronized
Gears 8 forward and 2 reverse
Speed Forward: 29.0 kmh (18 mph) Reverse: 10.0 kmh (6.2 mph)
Transmission oil capacity 58.7 L (15.5 US. gal, 12.9 Imp. gal.)
Tires
Front tires Ag: 11L-15
Rear tires Ag: 18.4-34

Three-Point Hitch
Category II/I
Control type
Lift capacity (at ends) 2,600 kg (5,730 lbs)
3,070 kg (6,765 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1000 rpm
Hydraulic system
Hydraulic type Closed center
Hydraulic capacity 41.6 L (11 US. gal, 9.2 Imp. gal.)
Valves 1 or 2
Pump flow 23.0 gpm (87.1 lpm)

Maybe that’s all the information about the John Deere 4240 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment