John Deere 4250

Specifications and review tractor John Deere 4250 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 4250The John Deere 4250 is a 2WD or 4WD row-crop tractor from the 50 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1983 to 1988. The John Deere 4250 is equipped with a 7.6 L (466.0 cu·in) six-cylinder diesel engine and one of two transmissions: a partial power shift transmission with 16 forward and 6 reverse gears or a full power shift transmission with 15 forward and 4 reverse gears.

The John Deere 4250 row-crop tractor used the John Deere engine. It is a 7.6 L, 7,636 cm2, (466.0 cu·in) six-cylinder turbocharged diesel engine with 116.0 mm (4.57 in) of the cylinder bore and 121.0 mm (4.76 in) of the piston stroke. The compression ratio rating is 15.8:1. This engine produced 121.7 PS (89.5 kW; 120 HP) at 2,200 rpm of PTO output power.

The JD 4250 is equipped with power steering, differential hydraulic wet disc brakes, Sound-Gard cab or four-post Roll-Gard ROPS (optional) and 246.0 liters (65 US gal.; 54.1 Imp. gal) fuel tank.

Following attachments are available for the JD 4250 row-crop tractor:

  • John Deere 148 loader
  • John Deere 158 loader
  • John Deere 260 loader
  • John Deere 280 loader

John Deere 4250 Specifications

General Specifications
Model John Deere 4250
Length 2WD: 3,910 mm (153.9 in)
4WD: 4,160 mm (164.1 in)
Width 2,430 mm (95.7 in)
Long axle: 2,870 mm (113.0 in)
Height (Cab) 2,950 mm (116.1 in)
Wheel base 2WD: 2,710 mm (106.7 in)
4WD: 2,670 mm (105.3 in)
Ground clearance 400 mm (15.7 in)
Weight (operating) 6,285 kg (13,856 lbs)
Fuel tank capacity 246.0 liters (65 US gal.; 54.1 Imp. gal)
Battery 6V or 12V
Cabin type Sound-Gard cab or four-post Roll-Gard ROPS (optional)
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 7.6 L, 7,636 cm2, (466.0 cu·in)
Bore and stroke 116.0 mm X 121.0 mm (4.57 in X 4.76 in)
Compression ratio 15.8:1
Horsepower 121.7 PS (89.5 kW; 120.0 HP) at 2,200 rpm
Starter Electric
Oil capacity: 17.0 L (18 US. qt, 15 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Differential hydraulic wet disc
Final drive Inboard planetary
Differential lock Hydraulic rear
Transmission model John Deere Quad-Range
Transmission type Partial power shift with Perma-Clutch wet disc clutch
Gears 16 forward and 6 reverse
Speed Forward: 29.4 kmh (18.3 mph) Reverse: 18.6 (11.6 mph)
Transmission oil capacity 60.6 L (16 US. gal, 13.3 Imp. gal.)
Transmission model John Deere Power Shift
Transmission type Full power shift with Perma-Clutch wet disc clutch
Gears 15 forward and 4 reverse
Speed Forward: 29.3 kmh (18.2 mph) Reverse: 8.8 (5.5 mph)
Transmission oil capacity 2WD: 39.7 L (10.5 US. gal, 8.7 Imp. gal.)
4WD: 51.0 L (13.5 US. gal, 11.2 Imp. gal.)
Tires
Front tires Ag: 10.00-16
Rear tires Ag: 18.4-38

Three-Point Hitch
Caterogy IIIN/II
Control type Lower-link draft sensing
Lift capacity (at ends) 2,855 kg (6,295 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with hydraulic wet disc clutch
Rear PTO speed 540/1,000 rpm
Hydraulic system
Hydraulic type Closed center
Pressure 2277 psi (157.0 bar)
Valves 2 or 3
Pump flow 26.5 gpm (100.3 lpm)

Maybe that’s all the information about the John Deere 4250 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment