Specifications and review tractor John Deere 440 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The John Deere 440 is a 2WD industrial tractor manufactured by John Deere in Dubuque, Iowa, USA from 1958 to 1960.
The John Deere 440 is equipped with one of two engines: a 1.7 L (106.0 cu·in) two-cylinder supercharged diesel engine or a 1.9 L (113.3 cu·in) two-cylinder gasoline engine and one of two transmissions: a gear type transmission with 4 forward and 1 reverse gear and dry disc clutch or a gear type transmission with 5 forward and 1 reverse gear and dry disc clutch.
The tractor could be equipped with the following engines:
General Motors 2-53. It is a 1.7 L, 1,737 cm2, (106.0 cu·in) two-cylinder supercharged diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 114.0 mm (4.49 in) of the piston stroke. The compression ratio rating is 17.0:1.
John Deere. It is a 1.9 L, 1,857 cm2, (113.3 cu·in) two-cylinder natural aspirated gasoline engine. The cylinder bore is 108.0 mm (4.25 in) and the piston stroke is 102.0 mm (4.02 in). The compression ratio rating is 7.5:1.
The John Deere 440 is equipped with power assist steering, open operator station, and 39.7 liters (10.5 US gal.; 8.7 Imp. gal) fuel tank.
Following attachments are available for the John Deere 440 industrial tractor:
John Deere 71 loader
John Deere 50 backhoe
John Deere 51 backhoe
John Deere 440 Specifications
General Specifications
Model
John Deere 440
Length
–
Width
–
Height
–
Wheel base
2,150 mm (84.6 in)
Weight
Gas: 1,850 kg (4,080 lbs) Diesel: 2,005 kg (4,420 lbs)
Fuel tank capacity
39.7 liters (10.5 US gal.; 8.7 Imp. gal)
Battery
12V
Cabin type
Open operator station
Engine
Engine model
General Motors 2-53
Engine type
Four-stroke, liquid-cooled, inline
Cylinders
2
Fuel type
Diesel
Displacement
1.7 L, 1,737 cm2, (106.0 cu·in)
Bore and stroke
98.0 mm X 114.0 mm (3.86 in X 4.49 in)
Compression ratio
17.0:1
Horsepower
–
Starter
Electric
Coolant capacity:
9.5 L (10 US. qt, 8.4 Imp. qt.)
Engine
Engine model
John Deere
Engine type
Four-stroke, liquid-cooled, inline
Cylinders
2
Fuel type
Gasoline
Displacement
1.9 L, 1,857 cm2, (113.3 cu·in)
Bore and stroke
108.0 mm X 102.0 mm (4.25 in X 4.02 in)
Compression ratio
7.5:1
Horsepower
–
Starter
Electric
Transmission and chassis
Chassis
4×2 2WD
Steering type
Power assist
Brakes
–
Transmission model
–
Transmission type
Gear type with dry disc clutch
Gears
4 forward and 1 reverse
Speed
Forward: 8.4 kmh (5.2 mph) Reverse: 2.8 (1.7 mph)
Transmission model
–
Transmission type
Gear type with dry disc clutch
Gears
5 forward and 1 reverse
Speed
Forward: 8.4 kmh (5.2 mph) Reverse: 2.8 (1.7 mph)
Tires
Front tires
Industrial: 6.00-16, 7.50-16
Rear tires
Industrial: 12-28, 12-26, 13-26
Three-Point Hitch
Caterogy
I
Control type
–
Lift capacity (at ends)
–
PTO (Power take-off shaft)
Rear PTO type
–
Rear PTO speed
540/1,000 rpm
Hydraulic system
Hydraulic type
Open center
Valves
1
Maybe that’s all the information about the John Deere 440 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you
The John Deere 440 is a 2WD industrial tractor manufactured by John Deere in Dubuque, Iowa, USA from 1958 to 1960. 
