Specifications and review tractor John Deere 4450 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The John Deere 4450 is a 2WD or 4WD row-crop tractor from the 50 series. This tractor was manufactured by the John Deere in Waterloo, Iowa, USA from 1983 to 1988. The JD 4450 tractor is equipped with a 7.6 L six-cylinder diesel engine and one of two transmissions: partial power shift transmission with 16 forward and 6 reverse gears or full power shift transmission with 15 forward and 4 reverse gears.
The John Deere 4450 row-crop tractor used the John Deere engine. It is a 7.6 L, 7,636 cm2, (466.0 cu·in) six-cylinder turbocharged diesel engine with 116.0 mm (4.57 in) of the cylinder bore and 121.0 mm (4.76 in) of the piston stroke. The compression ratio rating is 15.8:1. This engine produced 157.2 PS (115.6 kW; 155.0 HP) at 2,700 rpm of gross output power.
The John Deere 4450 is equipped with power steering, hydraulic wet disc brakes, Sound-Gard cab or four-post Roll-Gard ROPS (optional) and 246.0 liters (65 US gal.; 54.1 Imp. gal) fuel tank.
Following attachments are available for the JD 4450 row-crop tractor:
John Deere 158 loader
John Deere 265 loader
John Deere 280 loader
John Deere 4450 Specifications
General Specifications
Model
John Deere 4450
Length
2WD: 3,910 mm (153.9 in) 4WD: 4,160 mm (164.1 in)
Width
2,430 mm (95.7 in)
Height
2,950 mm (116.1 in)
Wheel base
2WD: 2,710 mm (106.7 in) 4WD: 2,670 mm (105.3 in)
Weight
6,985 kg (15,400 lbs)
Fuel tank capacity
246.0 liters (65 US gal.; 54.1 Imp. gal)
Battery
2x6V or 12V
Cabin type
Sound-Gard cab standard or four-post Roll-Gard ROPS (optional)
2WD: 39.7 L (10.5 US gal, 8.7 Imp. gal) 4WD: 51.0 L (13.5 US gal, 11.2 Imp. gal)
Tires
Front tires
Ag: 10.00-16
Rear tires
Ag: 18.4-38
Three-Point Hitch
Caterogy
IIIN/II
Control type
–
Lift capacity (at ends)
2,854 kg (6,293 lbs)
3,364 kg (7,418 lbs)
PTO (Power take-off shaft)
Rear PTO type
Independent
Rear PTO spped
540 rpm
Hydraulic system
Hydraulic type
Closed center
Pressure
2,277 psi (157 bar)
Valves
2 to 3
Pump flow
26.5 gpm (100.3 lpm)
Maybe that’s all the information about the John Deere 4450 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you
The John Deere 4450 is a 2WD or 4WD row-crop tractor from the 50 series. This tractor was manufactured by the John Deere in Waterloo, Iowa, USA from 1983 to 1988. The JD 4450 tractor is equipped with a 7.6 L six-cylinder diesel engine and one of two transmissions: partial power shift transmission with 16 forward and 6 reverse gears or full power shift transmission with 15 forward and 4 reverse gears.
