John Deere 4755

Specifications and review tractor John Deere 4755 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 4755The John Deere 4755 is a 2WD or 4WD row-crop tractor from the 4055 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1989 to 1991. The John Deere 4755 is equipped with a 7.6 L (466.0 cu·in) six-cylinder diesel engine and one of two transmissions: a partial power shift transmission with 16 forward and 6 reverse gears or a full power shift transmission with 15 forward and 4 reverse gears.

The JD 4755 row-crop tractor used the John Deere engine. It is a 7.6 L, 7,636 cm2, (466.0 cu·in) six-cylinder turbocharged diesel engine with 116.0 mm (4.57 in) of the cylinder bore and 121.0 mm (4.76 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 177.5 PS (130.5 kW; 175.0 HP) at 2,200 rpm of PTO output power.

The John Deere 4755 is equipped with power steering, hydraulic wet disc brakes, Sound-Gard cab, and 386.0 liters (102 US gal.; 84.9 Imp. gal) fuel tank.

Following attachments are available for the JD 4755 row-crop tractor:

  • John Deere 280 loader
  • John Deere 840 loader

John Deere 4755 Specifications

General Specifications
Model John Deere 4755
Length
Width 2,990 mm (117.7 in)
Height 3,010 mm (118.5 in)
Wheel base 2WD: 3,000 mm (118.1 in)
4WD: 2,970 mm (117.1 in)
Weight (shipping) 7,350 kg (16,204 lbs)
Fuel tank capacity 386.0 liters (102 US gal.; 84.9 Imp. gal)
Battery Two 12V, CCA 925A
Cabin type Sound-Gard cab
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 7.6 L, 7,636 cm2, (466.0 cu·in)
Bore and stroke 116.0 mm X 121.0 mm (4.57 in X 4.76 in)
Compression ratio 16.0:1
Horsepower 177.5 PS (130.5 kW; 175 HP) at 2,200 rpm
Starter Electric
Oil capacity: 20.8 L (22 US. qt, 18.3 Imp. qt.)
Coolant capacity: 30.3 L (32 US. qt, 26.7 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Hydraulic wet disc
Final drive Inboard planetary
Transmission model John Deere Quad Range
Transmission type Partial power shift
Gears 16 forward and 6 reverse
Transmission model John Deere Power Shift
Transmission type Full power shift
Gears 15 forward and 4 reverse
Speed Forward: 31.0 kmh (19.3 mph) Reverse: 10.3 (6.4 mph)
Tires
Front tires Ag: 11.00-16
Rear tires Ag: 20.8-38

Three-Point Hitch
Caterogy III
Control type
Lift capacity (at ends) 2,640 kg (5,820 lbs)
With 44 mm lift cylinder: 3,000 kg (6,615 lbs)
With 55 mm lift cylinder: 3,200 kg (7,060 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with hydraulic clutch
Rear PTO speed 1,000 rpm
Hydraulic system
Hydraulic type Closed center
Pressure 2530 psi (174.4 bar)
Valves 2 or 3
Pump flow 29.5 gpm (111.7 lpm)
CSV flow 20.6 gpm (78 lpm)

Maybe that’s all the information about the John Deere 4755 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment