Specifications and review tractor John Deere 4760 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The John Deere 4760 is a 2WD or 4WD row-crop tractor from the 4060 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1992 to 1994. The John Deere 4760 is equipped with a 7.6 L (466.0 cu·in) six-cylinder diesel engine and one of two transmissions: a partial power shift transmission with 16 forward and 6 reverse gears and Perma-Clutch hydraulic wet disc clutch or a full power shift transmission with 15 forward and 4 reverse gears.
The JD 4760 row-crop tractor used the John Deere engine. It is a 7.6 L, 7,636 cm2, (466.0 cu·in) six-cylinder turbocharged aftercooled diesel engine with 116.0 mm (4.57 in) of the cylinder bore and 121.0 mm (4.76 in) of the piston stroke. The compression ratio rating is 15.5:1. This engine produced 177.5 PS (130.5 kW; 175 HP) at 2,200 rpm of PTO output power.
The JD 4760 is equipped with power steering, differential hydraulic wet disc brakes, Sound-Gard cab standard, and 386.1 liters (102 US gal.; 84.9 Imp. gal) fuel tank. This tractor could be equipped with the John Deere 840 loader.
|
John Deere 4760 Specifications
General Specifications | |
Model | John Deere 4760 |
Length | – |
Width | 3,000 mm (118.1 in) |
Height | 3,010 mm (118.5 in) |
Wheel base |
2WD: 3,000 mm (118.1 in) 4WD: 2,970 mm (116.9 in) |
Weight | 8,485 kg (18,700 lbs) |
Fuel tank capacity | 386.1 liters (102 US gal.; 84.9 Imp. gal) |
Battery | Three 12V, CCA 925A |
Cabin type | Sound-Gard cab standard |
Engine | |
Engine model | John Deere |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 7.6 L, 7,636 cm2, (466.0 cu·in) |
Bore and stroke | 116.0 mm X 121.0 mm (4.57 in X 4.76 in) |
Compression ratio | 15.5:1 |
Horsepower | 177.5 PS (130.5 kW; 175.0 HP) at 2,200 rpm |
Starter | Electric |
Oil capacity: | 20.8 L (22 US. qt, 18.3 Imp. qt.) |
Coolant capacity: | 30.3 L (32 US. qt, 26.7 Imp. qt.) |
|
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Differential hydraulic wet disc |
Final drive | Inboard planetary |
Transmission model | John Deere Quad Range |
Transmission type | Partial power shift with Perma-Clutch hydraulic wet disc clutch |
Gears | 16 forward and 6 reverse |
Transmission model | John Deere Power Shift |
Transmission type | Full power shift |
Gears | 15 forward and 4 reverse |
Speed | Forward: 31.0 kmh (19.3 mph) Reverse: 10.3 (6.4 mph) |
Tires | |
Front tires | Ag: – |
Rear tires | Ag: – |
|
Three-Point Hitch | |
Category | III/IIIN |
Control type | Electrohydraulic draft sensing |
Lift capacity (at ends) |
3,760 kg (8,290 lbs) 4,555 kg (10,040 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 1000 rpm |
Hydraulic system | |
Hydraulic type | Closed center |
Hydraulic capacity | 74.9 L (19.8 US. gal, 16.5 Imp. gal.) |
Pressure | 2350 psi (162 bar) |
Valves | 3 or 4 |
Pump flow |
Quad Range: 35.2 gpm (133.2 lpm) Power Shift: 31.6 gpm (119.6 lpm) |
Maybe that’s all the information about the John Deere 4760 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you