John Deere 4850

Specifications and review tractor John Deere 4850 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 4850John Deere 4850The John Deere 4850 is a 2WD or 4WD row-crop tractor from the 50 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1983 to 1988. The JD 4850 is equipped with a 7.6 L (466.0 cu·in) six-cylinder diesel engine and a full power shift transmission with 15 forward and 4 reverse gears and Perma-Clutch wet disc clutch.

The John Deere 4850 row-crop tractor used the John Deere engine. It is a 7.6 L, 7,636 cm2, (466.0 cu·in) six-cylinder turbocharged intercooled diesel engine with 116.0 mm (4.57 in) of the cylinder bore and 121.0 mm (4.76 in) of the piston stroke. The compression ratio rating is 15.0:1. This engine produced 192.7 PS (141.7 kW; 190.0 HP) at 2,200 rpm of output power.

The JD 4850 is equipped with power steering, hydraulic wet disc brakes, Sound-Gard cab or four-post Roll-Gard ROPS (optional), and 386.1 liters (102 US gal.; 84.9 Imp. gal) fuel tank.


John Deere 4850 Specifications

General Specifications
Model John Deere 4850
Length 2WD: 4,560 mm (179.5 in)
4WD: 4,690 mm (184.6 in)
Width Standard axle: 2,990 mm (117.7 in)
Optional axle: 2,150 mm (84.6 in)
Optional axle: 2,740 mm (108.0 in)
Height 2,990 mm (117.7 in)
Wheel base 2WD: 3,000 mm (118.1 in)
4WD: 2,970 mm (116.9 in)
Ground clearance 370 mm (14.6 in)
Weight (operating) 2WD: 8,490 kg (18,717 lbs)
Fuel tank capacity 386.1 liters (102 US gal.; 84.9 Imp. gal)
Battery
Cabin type Sound-Gard cab or four-post Roll-Gard ROPS (optional)
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 7.6 L, 7,636 cm2, (466.0 cu·in)
Bore and stroke 116.0 mm X 121.0 mm (4.57 in X 4.76 in)
Compression ratio 15.0:1
Horsepower 192.7 PS (141.7 kW; 190.0 HP) at 2,200 rpm
Starter Electric
Oil capacity: 19.9 L (21 US. qt, 17.5 Imp. qt.)
Coolant capacity: 30.3 L (32 US. qt, 26.7 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Hydraulic wet disc
Final drive Inboard planetary
Differential lock Hydraulic rear
Transmission model John Deere Power Shift
Transmission type Full power shift with Perma-Clutch wet disc clutch
Gears 15 forward and 4 reverse
Speed Forward: 28.9 kmh (18 mph) Reverse: 9.7 (6 mph)
Transmission oil capacity 70.4 L (18.6 US. gal, 15.5 Imp. gal.)
Tires
Front tires Ag: 11.00-16
Rear tires Ag: 20.8-38

Three-Point Hitch
Category III
Control type Lower-link draft sensing
Lift capacity (at ends) 4,355 kg (9,600 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with hydraulic wet disc clutch
Rear PTO speed 1,000 rpm
Hydraulic system
Hydraulic type Closed center
Hydraulic capacity 2WD: 70.4 L (18.6 US. gal, 15.5 Imp. gal.)
4WD: 81.8 L (21.6 US. gal, 18.0 Imp. gal.)
Pressure 2277 psi (157 bar)
Valves 2 or 3
Pump flow 29.5 gpm (111.7 lpm)

Maybe that’s all the information about the John Deere 4850 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment