John Deere 5010

Specifications and review tractor John Deere 5010 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 5010The John Deere 5010 is a 2WD standard-tread tractor from the New Generation series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1963 to 1965. The John Deere 5010 is equipped with a 8.7 L (531.0 cu·in) six-cylinder diesel engine and a syncro-range transmission with 8 forward and 3 reverse gears.

The John Deere 5010 standard-tread tractor used the John Deere engine. It is a 8.7 L, 8,701 cm2, (531.0 cu·in) six-cylinder natural aspirated diesel engine with 121.0 mm (4.76 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 122.7 PS (90.2 kW; 121.0 HP) at 2,200 rpm of PTO output power.

The JD 5010 is equipped with power steering, hydraulic wet disc brakes, open operator station, and 182.0 liters (48.1 US gal.; 40 Imp. gal) fuel tank.

John Deere 5010 Specifications

General Specifications
Model John Deere 5010
Length 4,370 mm (172 in)
Width 2,430 mm (95.7 in)
Height 2,440 mm (96.1 in)
Wheel base 2,640 mm (103.9 in)
Ground clearance 400 mm (15.7 in)
Weight (operating) 5,860 kg (12,920 lbs)
Fuel tank capacity 182.0 liters (48.1 US gal.; 40 Imp. gal)
Battery Four 6V, 115Ah
Cabin type Open operator station
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 8.7 L, 8,701 cm2, (531.0 cu·in)
Bore and stroke 121.0 mm X 127.0 mm (4.76 in X 5 in)
Compression ratio 16.0:1
Horsepower 122.7 PS (90.2 kW; 121.0 HP) at 2,200 rpm
Starter Electric
Oil capacity: 11.4 L (12 US. qt, 10 Imp. qt.)
Coolant capacity: 32.2 L (34 US. qt, 28.3 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD
Steering type Power
Brakes Hydraulic wet disc
Transmission model
Transmission type Syncro-Range
Gears 8 forward and 3 reverse
Speed Forward: 28.6 kmh (17.8 mph) Reverse: 16.9 (10.5 mph)
Transmission oil capacity 64.4 L (17 US. gal, 14.2 Imp. gal.)
Front tires Ag: 11.00-16
Rear tires Ag: 24.5-32

Three-Point Hitch
Caterogy III/II
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1,000 rpm
Hydraulic system
Hydraulic type Closed center
Hydraulic capacity 64.4 L (17.0 US. gal, 14.2 Imp. gal.)
Pressure 2250 psi (155.1 bar)
Valves 1 or 2
Pump flow 20.0 gpm (75.7 lpm)

Maybe that’s all the information about the John Deere 5010 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment