John Deere 5075E (2015-2020)

Specifications and review tractor John Deere 5075E (2015-2020) Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 5075E (2015-2020)The John Deere 5075E is a 2WD/4WD utility tractor from the 5E series. This tractor has been manufactured by John Deere in Pune, Maharashtra, India since 2008. The third generation has been manufactured from 2015. The John Deere 5075E is equipped with a 2.9 L three-cylinder diesel engine and Top-Shaft Synchronized transmission with 9 forward and 3 reverse gears or PowrReverser transmission with 12 forward and 12 reverse gears.

The JD 5075E utility tractor used the John Deere PowerTech 3029 engine. It is a 2.9 L, 2,933 cm2, (179.0 cu·in) three-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 16.8:1. This engine produced 74.0 PS (54.4 kW; 73.0 HP) at 2,100 rpm of maximum output power.

The John Deere 5075E is equipped with hydrostatic power steering, hydraulic wet disc brakes, two-post foldable ROPS (the cab was available as an option) and 68.0 liters (18 US gal.; 15 Imp. gal) fuel tank for ROPS version or 82.0 liters (21.7 US gal, 18 Imp. gal) for Cab version.

Following attachments are available for the JD 5075E utility tractor:

  • John Deere 512 loader
  • John Deere H240 MSL loader

John Deere 5075E Specifications

General Specifications
Model John Deere 5075E
Length 3,500 mm (137.8 in)
Width 1,450 mm (57.1 in)
Height ROPS: 2,520 mm (99.5 in)
Cab: 2,410 mm (95.0 in)
Wheel base 2,040 mm (80.3 in)
Weight 2WD with ROPS: 2,100 kg (4,630 lbs)
4WD with ROPS: 2,300 kg (5,070 lbs)
4WD with Cab: 2,600 kg (5,730 lbs)
Fuel tank capacity ROPS: 68.0 liters (18 US gal.; 15 Imp. gal)
Cab: 82.0 liters (21.7 US gal, 18 Imp. gal)
Battery ROPS: 12V, CCA: 622A, 80Ah
Cab: 12V, CCA: 925A, 95Ah
Cabin type Two-post foldable ROPS. Cab optional.
Engine
Engine model John Deere PowerTech 3029
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.9 L, 2,933 cm2, (179.0 cu·in)
Bore and stroke 106.0 mm X 110.0 mm (4.17 in X 4.33 in)
Compression ratio 16.9:1
Horsepower 74.0 PS (54.4 kW; 73.0 HP) at 2,100 rpm
Starter Electric

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Hydraulic wet disc
Transmission model PowrReverser
Transmission type Partially synchronized power shuttle
Gears 12 forward and 12 reverse
Speed Forward: 31.8 kmh (19.8 mph) Reverse: 31.8 (19.8 mph)
Transmission model Top-Shaft Synchronized (TSS)
Transmission type Partially synchronized with dry disc clutch
Gears 9 forward and 3 reverse
Speed Forward: 28.0 kmh (17.4 mph) Reverse: 22.1 (13.7 mph)
Tires
Front tires Ag: 7.50-16 (2WD), 9.5-24 (4WD)
Rear tires Ag: 16.9-28

Three-Point Hitch
Caterogy II
Control type Position and top-link draft control
Lift capacity (at ends) 1,800 kg (3,970 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Valves 1 or 2
Pump flow 11.4 gpm (43.2 lpm)
Steering flow 6.8 gpm (25.7 lpm)
Total flow 18.2 gpm (68.9 lpm)

Maybe that’s all the information about the John Deere 5075E (2015-2020) tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment