John Deere 5083E

Specifications and review tractor John Deere 5083E Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 5083EThe John Deere 5083E is a 4WD utility tractor from the 5E Limited series. This tractor was manufactured by John Deere in Augusta, Georgia, USA from 2008 to 2012. The John Deere 5083E is equipped with a 4.5 L (276.0 cu·in) four-cylinder diesel engine and a partially synchronized with wet disc clutch transmission with 12 forward and 12 reverse gears.

The JD 5083E utility tractor used the John Deere PowerTech 4045 engine. It is a 4.5 L, 4,523 cm2, (276.0 cu·in) four-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 127.0 mm (5.00 in) of the piston stroke. The compression ratio rating is 17.6:1. This engine produced 84.2 PS (61.9 kW; 83.0 HP) at 2,400 rpm of output power.

The John Deere 5083E is equipped with hydrostatic power steering, independent hydraulic wet disc brakes, Cab (standard) and 126.8 liters (33.5 US gal.; 27.9 Imp. gal) fuel tank.

Following attachments are available for the JD 5083E utility tractor:

  • John Deere 553 loader
  • John Deere 563 loader

John Deere 5083E Specifications

General Specifications
Model John Deere 5083E
Length 3,740 mm (147.2 in)
Width 1,640 mm (64.6 in)
Height (cab) 2,500 mm (98.4 in)
Wheel base 2,170 mm (85.4 in)
Ground clearance (front axle) 410 mm (16.1 in)
Weight 3,265 kg (7,198 lbs)
Fuel tank capacity 126.8 liters (33.5 US gal.; 27.9 Imp. gal)
Battery 12V, CCA 750A
Cabin type Cab (standard)
Engine model John Deere PowerTech 4045
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 4.5 L, 4,523 cm2, (276.0 cu·in)
Bore and stroke 106.0 mm X 127.0 mm (4.17 in X 5 in)
Compression ratio 17.6:1
Horsepower 84.2 PS (61.9 kW; 83 HP) at 2,400 rpm
Starter Electric

Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Independent hydraulic wet disc
Final drive Planetary
Differential lock Rear standard
Transmission model PowrReverser
Transmission type Partially synchronized with wet disc clutch
Gears 12 forward and 12 reverse
Speed Forward: 36.0 kmh (22.4 mph) Reverse: 39.2 kmh (24.4 mph)
Front tires Ag: 11.2-24, 12.4-24
Industrial: 12.5/80-18
Rear tires Ag: 16.9-30, 18.4-30
Industrial: 19.5L-24

Three-Point Hitch
Category II/I
Control type Position control and top-link draft sensing
Lift capacity (at ends) 1460 kg (3219 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with mechanical clutch
Rear PTO speed 540/540E or 540/1000 (optional) rpm
Hydraulic system
Hydraulic type Open center
Pressure 2828 psi (195 bar)
Valves Rear: 1 to 3
Mid: 2 (optional)
Pump flow 15.9 gpm (60.2 lpm)
Steering flow 6.6 gpm (25 lpm)
Total flow 22.5 gpm (85.2 lpm)

Maybe that’s all the information about the John Deere 5083E tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment