Specifications and review tractor John Deere 60 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The John Deere 60 is a 2WD row-crop tractor manufactured by John Deere in Waterloo, Iowa, USA from 1952 to 1956. The John Deere 60 is equipped with a 5.3 L (321.0 cu·in) two-cylinder engine and a unsynchronized gear with dry disc clutch transmission with 6 forward and 1 reverse gears.
The John Deere 60 row-crop tractor used the John Deere engine. It is a 5.3 L, 5,260 cm2, (321.0 cu·in) two-cylinder natural aspirated engine with 140.0 mm (5.51 in) of the cylinder bore and 171.0 mm (6.73 in) of the piston stroke. This engine was available in three versions for gasoline, all-fuel, or LP-gas. The compression ratio rating is 6.0:1 for the gasoline version, 4.7:1 for the all-fuel, or 7.3:1 for the LP-gas version. This engine produced 46.6 PS (34.3 kW; 46.0 HP) at 975 rpm of output power.
The JD 60 is equipped with manual or power (optional) steering, differential mechanical expanding shoe brakes, an open operator station, and 77.6 liters (20.5 US gal.; 17.1 Imp. gal) fuel tank for gasoline and all fuel versions, or 106.0 liters (28.0 US gal.; 23.3 Imp. gal) for LP-gas.
|
John Deere 60 Specifications
General Specifications | |
Model | John Deere 60 |
Length | 3,530 mm (139 in) |
Width | 2,200 mm (86.6 in) |
Height |
Hood: 1,660 mm (65.4 in) Exhaust: 2,130 mm (83.9 in) |
Wheel base | 2,280 mm (89.8 in) |
Weight (operating) | 2,630 kg (5,798 lbs) |
Fuel tank capacity |
77.6 liters (20.5 US gal.; 17.1 Imp. gal) LP-gas: 106.0 liters (28.0 US gal.; 23.3 Imp. gal) |
Battery | Two 6V |
Cabin type | Open operator station |
Engine | |
Engine model | John Deere |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 2 |
Fuel type | Gasoline/All-fuel/LP-gas |
Displacement | 5.3 L, 5,260 cm2, (321.0 cu·in) |
Bore and stroke | 140.0 mm X 171.0 mm (5.51 in X 6.73 in) |
Compression ratio |
Gasoline: 6.0:1 All-fuel: 4.7:1 LP-gas: 7.3:1 |
Horsepower | 46.6 PS (34.3 kW; 46.0 HP) at 975 rpm |
Starter | Electric |
Oil capacity: | 7.6 L (8 US. qt, 6.7 Imp. qt.) |
Coolant capacity: | 31.2 L (33 US. qt, 27.5 Imp. qt.) |
|
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Manual or power (optional) |
Brakes | Differential mechanical expanding shoe |
Transmission model | John Deere |
Transmission type | Unsynchronized gear with dry disc clutch |
Gears | 6 forward and 1 reverse |
Speed | Forward: 17.7 kmh (11.0 mph) Reverse: 4.8 kmh (3.0 mph) |
Tires | |
Front tires | Ag: 6.00-16, 7.50-16, 9.00-10 |
Rear tires | Ag: 11-38, 12-38, 9-42, 11-42 |
|
Three-Point Hitch | |
Type | John Deere 800 |
Control type | – |
Lift capacity (at ends) | – |
PTO (Power take-off shaft) | |
Rear PTO type | Transmission or independent (optional) |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | Powr-Trol |
Hydraulic capacity | 5.7 L (1.5 US. gal, 1.3 Imp. gal.) |
Pressure | 930 psi (64.1 bar) |
Valves | 1 |
Pump flow | 8.9 gpm (33.7 lpm) |
Maybe that’s all the information about the John Deere 60 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you