John Deere 6130M (2015-2020)

Specifications and review tractor John Deere 6130M (2015-2020) Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 6130MThe John Deere 6130M is a 2WD or 4WD utility tractor from the 6M series. This tractor was manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 2015 to 2022. THis first generation was manufactured from 2015 to 2020. The JD 6130M is equipped with a 4.5 L (276.0 cu·in) four-cylinder diesel engine and one of four transmission variants.

The John Deere 6130M utility tractor used the John Deere PowerTech PSS engine. It is a 4.5 L, 4,523 cm2, (276.0 cu·in) four-cylinder turbocharged aftercooled diesel engine with 105.0 mm (4.13 in) of the cylinder bore and 127.0 mm (5.00 in) of the piston stroke. This engine produced 131.8 PS (96.9 kW; 130.0 HP) at 2,100 rpm of output power.

The JD 6130M is equipped with power steering, hydraulic wet disc brakes, cab (standard) with air-conditoning or two-post folding ROPS and 193.0 liters (51.0 US gal.; 42.5 Imp. gal) fuel tank.

Following attachments are available for the John Deere 6130M utility tractor:

  • John Deere 620R loader
  • John Deere 640R loader

John Deere 6130M Specifications

General Specifications
Model John Deere 6130M
Length 4,480 mm (176.4 in)
Width 2,550 mm (100.4 in)
Height ROPS: 2,870 mm (113 in)
Cab: 2,870 mm (113 in)
Wheelbase 2,580 mm (101.6 in)
Ground clearance (front axle) 600 mm (23.6 in)
Weight 5,225 kg (11,519 lbs)
Fuel tank capacity 193.0 liters (51 US gal.; 42.5 Imp. gal)
Battery 12V
Cabin type Cab (standard) with air-conditoning or two-post folding ROPS
Engine
Engine model John Deere PowerTech PSS
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 4.5 L, 4,523 cm2, (276.0 cu·in)
Bore and stroke 105.0 mm X 127.0 mm (4.13 in X 5 in)
Horsepower 131.8 PS (96.9 kW; 130.0 HP) at 2,100 rpm
Starter Electric
Coolant capacity: 22.0 L (23.2 US. qt, 19.4 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Hydraulic wet disc
Final drive Inboard planetary
Differential lock Electro-hydraulic front and rear
Transmission model SyncroPlus
Transmission type
Gears 12 forward and 4 reverse
Transmission model PowrQuad
Transmission type Four-speed power shift with wet disc clutch
Gears 16 forward and 16 reverse
Speed Forward: 30.1 kmh (18.7 mph)
Transmission model PowrQuad
Transmission type Four-speed power shift with wet disc clutch
Gears 24 forward and 24 reverse
Speed Forward: 37.5 kmh (23.3 mph)
Transmission model AutoQuad PLUS
Transmission type Four-speed power shift with wet disc clutch
Gears 24 forward and 24 reverse
Speed Forward: 37.5 kmh (23.3 mph)
Tires
Front tires Ag: 10.00-16 (2WD), 380/85R28 (4WD)
Rear tires Ag: 460/85R38

Three-Point Hitch
Category IIIN/II
Control type Electronic lower-link draft sensing
Lift capacity (at ends) 2,936 kg (6,475 lbs)
3,835 kg (8,456 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with electro-hydraulic clutch
Rear PTO speed 540/1000 or 540 rpm
Hydraulic system
Hydraulic type Open center or closed-center pressure-and-flow compensated load sensing
Pressure 2900 psi (199.9 bar)
Valves Rear: 3
Mid: 3
Pump flow 21.1 gpm (79.9 lpm)
30.0 gpm (113.6 lpm)
SCV flow 21.1 gpm (79.9 lpm)

Maybe that’s all the information about the John Deere 6130M (2015-2020) tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment