John Deere 6155M (2015-2020)

Specifications and review tractor John Deere 6155M (2015-2020) Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 6155MThe John Deere 6155M is a 2WD or 4WD row-crop tractor from the 6M series. This tractor has been manufactured by John Deere in Mannheim, Baden-Württemberg, Germany since 2015. This first generation was manufactured from 2015 to 2020. The JD 6155M is equipped with a 6.8 L (414.0 cu·in) six-cylinder diesel engine and one of three transmission variants.

The JD 6155M row-crop tractor used the John Deere PowerTech PVS engine. It is a 6.8 L, 6,784 cm2, (414.0 cu·in) six-cylinder turbocharged intercooled diesel engine with 105.0 mm (4.13 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 157.2 PS (115.6 kW; 155.0 HP) at 2,100 rpm of output power.

The John Deere 6155M is equipped with power steering, hydraulic wet disc brakes, cab (standard) with air-conditoning or two-post folding ROPS (available) and 268.7 liters (71 US gal.; 59.1 Imp. gal) fuel tank.


John Deere 6155M Specifications

General Specifications
Model John Deere 6155M
Length 4,720 mm (185.8 in)
Width 2,550 mm (100.4 in)
Height ROPS: 2,910 mm (114.6 in)
Cab: 2,910 mm (114.6 in)
Wheel base 2,760 mm (108.7 in)
Ground clearance (front axle) 600 mm (23.6 in)
Weight (shipping) 5,930 kg (13,073 lbs)
Fuel tank capacity 268.7 liters (71 US gal.; 59.1 Imp. gal)
Battery 12V
Cabin type Cab (standard) with air-conditoning or two-post folding ROPS (available)
Engine
Engine model John Deere PowerTech PVS
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 6.8 L, 6,784 cm2, (414.0 cu·in)
Bore and stroke 105.0 mm X 127.0 mm (4.13 in X 5 in)
Horsepower 157.2 PS (115.6 kW; 155.0 HP) at 2,100 rpm
Starter Electric
Coolant capacity: 28.2 L (29.8 US. qt, 24.8 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Hydraulic wet disc
Final drive Inboard planetary
Differential lock Electro-hydraulic front and rear
Transmission model PowrQuad
Transmission type Four-speed power shift with wet disc clutch
Gears 16 forward and 16 reverse
Speed Forward: 30.1 kmh (18.7 mph)
Transmission model PowrQuad
Transmission type Four-speed power shift with wet disc clutch
Gears 20 forward and 20 reverse
Speed Forward: 38.6 kmh (24.0 mph)
Transmission model AutoQuad PLUS
Transmission type Four-speed power shift with wet disc clutch
Gears 20 forward and 20 reverse
Tires
Front tires Ag: 10.00-16 (2WD), 380/85R28 (4WD)
Rear tires Ag: 460/85R38

Three-Point Hitch
Category IIIN/II
Control type Electronic lower-link draft sensing
Lift capacity (at ends) 3,720 kg (8,198 lbs)
4,170 kg (9,193 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with electro-hydraulic clutch
Rear PTO speed 540/1000 or 540 rpm
Hydraulic system
Hydraulic type Cosed-center pressure-and-flow compensated
Pressure 2900 psi (199.9 bar)
Valves Rear: 3
Mid: 3
Pump flow 30.0 gpm (113.6 lpm)
Total flow 26.4 gpm (99.9 lpm)

Maybe that’s all the information about the John Deere 6155M (2015-2020) tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment