Specifications and review tractor John Deere 620 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The John Deere 620 is a 2WD row-crop tractor from the Two-Cylinder 20 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1956 to 1958. The John Deere 620 is equipped with a 5.0 L (303.0 cu·in) two-cylinder engine and an unsynchronized gear transmission with mechanical dry disc clutch and 6 forward and 1 reverse gears.
The JD 620 row-crop tractor used the John Deere engine. It is a 5.0 L, 4,965 cm2, (303.0 cu·in) two-cylinder natural aspirated engine with 140.0 mm (5.51 in) of the cylinder bore and 162.0 mm (6.38 in) of the piston stroke. This engine was available for gasoline, LP-gas, or all-fuel.
The John Deere 620 is equipped with power assist steering, differential mechanical contracting band brakes and open operator station.
John Deere 620 Specifications
General Specifications
Model
John Deere 620
Length
Standard: 3,430 mm (135.0 in) High-crop: 3,730 mm (147.2 in)
Width
Standard: 2,200 mm (86.6 in) High-crop: 1,870 mm (74.0 in)
Height
Standard: 2,230 mm (87.8 in) High-crop: 2,450 mm (96.7 in)
Wheel base
2,280 mm (89.8 in)
Weight
3,085 kg (6,801 lbs)
Fuel tank capacity
All-fuel: 77.6 liters (20.5 US gal.; 17.1 Imp. gal) Gasoline: 84.2 liters (22.2 US gal, 18.5 Imp. gal) LP-gas: 125.0 liters (33.0 US gal, 27.5 Imp. gal)
Battery
Two 6V
Cabin type
Open operator station
Engine
Engine model
John Deere
Engine type
Four-stroke, liquid-cooled, inline
Cylinders
2
Fuel type
Gasoline
Displacement
5.0 L, 4,965 cm2, (303.0 cu·in)
Bore and stroke
140.0 mm X 162.0 mm (5.51 in X 6.38 in)
Horsepower
–
Starter
Electric
Oil capacity:
7.6 L (8 US. qt, 6.7 Imp. qt.)
Coolant capacity:
24.6 L (26 US. qt, 21.6 Imp. qt.)
Transmission and chassis
Chassis
4×2 2WD
Steering type
Power assist
Brakes
Differential mechanical contracting band
Transmission model
John Deere
Transmission type
Unsynchronized gear with mechanical dry disc clutch
Gears
6 forward and 1 reverse
Speed
Forward: 18.5 kmh (11.5 mph) Reverse: 4.8 (3 mph)
Transmission oil capacity
22.7 L (6 US. gal, 5 Imp. gal.)
Tires
Front tires
Ag: 6.00-16, 7.50-20 (high-crop)
Rear tires
Ag: 12.4-38, 13-30
Three-Point Hitch
Caterogy
II
Control type
–
Lift capacity (at ends)
–
PTO (Power take-off shaft)
Rear PTO type
–
Rear PTO speed
540 rpm
Hydraulic system
Hydraulic type
–
Pressure
1200 psi (82.7 bar)
Valves
1 or 2
Pump flow
8.9 gpm (33.7 lpm)
Maybe that’s all the information about the John Deere 620 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you
The John Deere 620 is a 2WD row-crop tractor from the Two-Cylinder 20 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1956 to 1958. The John Deere 620 is equipped with a 5.0 L (303.0 cu·in) two-cylinder engine and an unsynchronized gear transmission with mechanical dry disc clutch and 6 forward and 1 reverse gears.
