John Deere 6210

Specifications and review tractor John Deere 6210 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 6210The John Deere 6210 is a 2WD utility tractor from the 6000 TEN series. This tractor was manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1999 to 2002. The JD 6210 is equipped with a 4.5 L (276.0 cu·in) four-cylinder diesel engine and one of four transmission variants.

The JD 6210 utility tractor used the John Deere 4045TL054 engine. It is a 4.5 L, 4,523 cm2, (276.0 cu·in) four-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 17.8:1. This engine produced 91.3 PS (67.1 kW; 90 HP) at 2,300 rpm of output power.

The John Deere 6210 is equipped with power steering, differential hydraulic wet disc brakes, two-post ROPS or ComfortGard cab (optional) and 116.2 liters (30.7 US gal.; 25.6 Imp. gal) fuel tank.

Following attachments are available for the John Deere 6210 utility tractor:

  • John Deere 620 loader
  • John Deere 640 loader
  • John Deere 640SL loader

John Deere 6210 Specifications

General Specifications
Model John Deere 6210
Length 4,130 mm (162.6 in)
Width 2,030 mm (79.9 in)
Height ROPS: 2,730 mm (107.5 in)
Cab: 2,580 mm (101.6 in)
Wheel base 2,400 mm (94.5 in)
Ground clearance 2WD: 580 mm (22.8 in)
4WD: 460 mm (18.1 in)
Weight (shipping) 2WD ROPS: 3,365 kg (7,419 lbs)
2WD Cab: 3,595 kg (7,926 lbs)
4WD ROPS: 3,590 kg (7,916 lbs)
4WD Cab: 3,820 kg (8,423 lbs)
Fuel tank capacity 116.2 liters (30.7 US gal.; 25.6 Imp. gal)
165.0 liters (43.6 US gal, 36.3 Imp. gal)
Battery 12V, CCA 830A
Cabin type Two-post ROPS or ComfortGard cab (optional)
Engine
Engine model John Deere 4045TL054
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 4.5 L, 4,523 cm2, (276.0 cu·in)
Bore and stroke 106.0 mm X 127.0 mm (4.17 in X 5 in)
Compression ratio 17.8:1
Horsepower 91.3 PS (67.1 kW; 90 HP) at 2,300 rpm
Torque 371.5 N·m (37.9 kg·m, 273.8 ft·lb) at 1,900 rpm
Starter Electric
Oil capacity: 12.0 L (12.7 US. qt, 10.6 Imp. qt.)
Coolant capacity: ROPS: 11.0 L (11.6 US. qt, 9.7 Imp. qt.)
Cab: 13.5 L (14.3 US.qt, 11.9 Imp. qts)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Differential hydraulic wet disc
Transmission model SyncroPlus
Transmission type Fully synchronized with wet disc clutch
Gears 12 forward and 4 reverse
Speed Forward: 29.8 kmh (18.5 mph) Reverse: 20.3 kmh (12.6 mph)
Transmission model SyncroPlus Power Reverser
Transmission type Four-speed power shift with wet disc clutch
Gears 16 forward and 16 reverse
Speed Forward: 29.8 kmh (18.5 mph)
Transmission model PowrQuad
Transmission type Four-speed power shift with hydraulic wet disc clutch
Gears 16 forward and 16 reverse
Speed Forward: 29.8 kmh (18.5 mph)
Transmission model PowrQuad
Transmission type Four-speed power shift with hydraulic wet disc clutch
Gears 24 forward and 24 reverse
Speed Forward: 29.8 kmh (18.5 mph)
Tires
Front tires Ag: 7.50-18 (2WD), 12.4-24 (4WD)
Rear tires Ag: 16.9-30

Three-Point Hitch
Category II
Control type Electronic lower-link draft sensing
Lift capacity (at ends) 2,150 kg (4,740 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540 or 540/1000 (optional) rpm
Hydraulic system
Hydraulic type Closed center pressure-flow compensating
Pressure 2900 psi (199.9 bar)
Valves 1 to 4
Pump flow 25.4 gpm (96.1 lpm)
18.9 gpm (71.5 lpm)

Maybe that’s all the information about the John Deere 6210 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment