Specifications and review tractor John Deere 7400 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The John Deere 7400 is a 2WD or 4WD row-crop tractor from the 7000 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1993 to 1996. The John Deere 7400 is equipped with a 6.8 L (414.0 cu·in) six-cylinder diesel engine and one of two transmissions: a fully synchronized transmission with 12 forward and 4 reverse gears or a four-speed power shift transmission with 16 forward and 12 reverse gears.
The JD 7400 row-crop tractor used the John Deere 6068 engine. It is a 6.8 L, 6,784 cm2, (414.0 cu·in) six-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 17.8:1. This engine produced 101.5 PS (74.6 kW; 100.0 HP) at 2,100 rpm of output power.
The John Deere 7400 is equipped with power steering, independent hydraulic wet disc brakes, the cab (standard) with air-conditioning, and 204.4 liters (54 US gal.; 45 Imp. gal) fuel tank.
|
John Deere 7400 Specifications
General Specifications | |
Model | John Deere 7400 |
Length | – |
Width | – |
Height | – |
Wheel base | 2,840 mm (111.8 in) |
Weight (operating) |
SyncroPlus: 5,745 kg (12,666 lbs) PowrQuad: 5,775 kg (12,732 lbs) |
Fuel tank capacity | 204.4 liters (54 US gal.; 45 Imp. gal) |
Battery | 12V |
Cabin type | Cab (standard) with air-conditioning |
Engine | |
Engine model | John Deere 6068 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 6.8 L, 6,784 cm2, (414.0 cu·in) |
Bore and stroke | 106.0 mm X 127.0 mm (4.17 in X 5 in) |
Compression ratio | 17.8:1 |
Horsepower | 101.5 PS (74.6 kW; 100.0 HP) at 2,100 rpm |
Starter | Electric |
|
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Independent hydraulic wet disc |
Transmission model | SyncroPlus |
Transmission type | Fully synchronized with hydraulic wet disc clutch |
Gears | 12 forward and 4 reverse |
Speed | Forward: 29.7 kmh (18.5 mph) Reverse: 19.6 kmh (12.2 mph) |
Transmission model | PowrQuad |
Transmission type | Four-speed power shift with hydraulic wet disc clutch |
Gears | 16 forward and 12 reverse |
Speed | Forward: 29.7 kmh (18.5 mph) Reverse: 16.9 kmh (10.5 mph) |
Tires | |
Front tires | Ag: 10.00-16 |
Rear tires | Ag: 18.4-38 |
|
Three-Point Hitch | |
Category | II/IIIN |
Control type | – |
Lift capacity (at 610 mm/ 24 in) | 3,110 kg (6,858 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 540/1000 rpm |
Hydraulic system | |
Hydraulic type | Closed center |
Hydraulic capacity | 2 or 3 L (0.5 US. gal, 0.4 Imp. gal.) |
Maybe that’s all the information about the John Deere 7400 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you