John Deere 7510

Specifications and review tractor John Deere 7510 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 7510The John Deere 7510 is a 2WD or 4WD row-crop tractor from the series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1999 to 2002. The JD 7510 is equipped with a 6.8 L (414.0 cu·in) six-cylinder diesel engine and one of three transmissions: a fully synchronized transmission with 12 forward and 4 reverse gears, a partial power shift transmission with 16 forward and 16 reverse gears or a partial power shift transmission with 20 forward and 20 reverse gears (28 forward and reverse with creeper).

The John Deere 7510 row-crop tractor used the John Deere PowerTech 6068 engine. It is a 6.8 L, 6,784 cm2, (414.0 cu·in) six-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 137 PS (100.7 kW; 135.0 HP) at 2,100 rpm of output power.

The JD 7510 is equipped with power steering, hydraulic wet disc brakes, ComfortGard cab (standard) and 189.3 liters (50 US gal.; 41.6 Imp. gal) fuel tank.


John Deere 7510 Specifications

General Specifications
Model John Deere 7510
Length 4,260 mm (167.7 in)
Width 2,430 mm (95.7 in)
Height (cab) 2WD: 2,830 mm (111.4 in)
4WD: 2,820 mm (111 in)
Wheel base 2WD: 2,840 mm (111.8 in)
4WD: 2,620 mm (103.1 in)
Ground clearance (front axle) 2WD: 610 mm (24 in)
4WD: 530 mm (20.9 in)
Weight (shipping) 2WD: 5,215 kg (11,497 lbs)
4WD: 5,600 kg (12,346 lbs)
Fuel tank capacity 189.3 liters (50 US gal.; 41.6 Imp. gal)
Battery 12V, CCA 925A, Group 31
Cabin type ComfortGard cab (standard)
Engine
Engine model John Deere PowerTech 6068
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 6.8 L, 6,784 cm2, (414.0 cu·in)
Bore and stroke 106.0 mm X 127.0 mm (4.17 in X 5 in)
Compression ratio 17.0:1
Horsepower 137 PS (100.7 kW; 135.0 HP) at 2,100 rpm
Torque 535.6 N·m (54.6 kg·m, 394.7 ft·lb) at rpm
Starter Electric
Oil capacity: 18.9 L (20 US. qt, 16.6 Imp. qt.)
Coolant capacity: 18.9 L (20 US. qt, 16.6 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Hydraulic wet disc
Final drive Inboard planetary
Differential lock Electro-hydraulic
Transmission model John Deere SyncroPlus
Transmission type Fully synchronized with wet disc clutch
Gears 12 forward and 4 reverse
Speed Forward: 30.4 kmh (18.9 mph) Reverse: 20.1 kmh (12.5 mph)
Transmission oil capacity 2WD: 56.8 L (15 US. gal, 12.5 Imp. gal.)
4WD: 64.4 L (17 US. gal, 14.2 Imp. gal.)
Transmission model John Deere PowrQuad
Transmission type Partial power shift with wet disc clutch
Gears 16 forward and 16 reverse
Speed Forward: 29.6 kmh (18.4 mph) Reverse: 36.0 kmh (22.4 mph)
Transmission oil capacity 2WD: 56.8 L (15 US. gal, 12.5 Imp. gal.)
4WD: 64.4 L (17 US. gal, 14.2 Imp. gal.)
Transmission model John Deere PowrQuad
Transmission type Partial power shift with wet disc clutch
Gears 20 forward and 20 reverse
Transmission oil capacity 2WD: 56.8 L (15 US. gal, 12.5 Imp. gal.)
4WD: 64.4 L (17 US. gal, 14.2 Imp. gal.)
Tires
Front tires Ag: 11.00-16 (2WD), 13.6R28 (4WD)
Rear tires Ag: 18.4-38

PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1000 rpm
Hydraulic system
Hydraulic type Closed center pressure flow compensated (PFC)
Hydraulic capacity 2900 L (766.1 US. gal, 637.9 Imp. gal.)
Valves 2 to 4
Pump flow 16.0 gpm (60.6 lpm)
Total flow 26.0 gpm (98.4 lpm)

Maybe that’s all the information about the John Deere 7510 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment