John Deere 7830

Specifications and review tractor John Deere 7830 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 7830The John Deere 7830 is a 4WD row-crop tractor from the 7030 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 2007 to 2011. The JD 7830 is equipped with a 6.8 L (414.0 cu·in) six-cylinder diesel engine and one of three transmissions: a partial power shift transmission with 16 forward and 16 reverse gears, a partial power shift transmission with 20 forward and 20 reverse gears or a infinitely variable transmission (IVT) with infinite forward and reverse gears.

The JD 7830 row-crop tractor used the John Deere engine. It is a 6.8 L, 6,784 cm2, (414.0 cu·in) six-cylinder turbocharged intercooled diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 207.9 PS (152.9 kW; 205.0 HP) at 2,100 rpm of output power.

The John Deere 7830 is equipped with power steering, hydraulic wet disc brakes, Cab (standard) and 390.0 liters (103 US gal.; 85.8 Imp. gal) fuel tank.


John Deere 7830 Specifications

General Specifications
Model John Deere 7830
Length 5,710 mm (224.8 in)
Width 2,430 mm (95.7 in)
Height Cab: 3,100 mm (122 in)
Wheel base 2,860 mm (112.6 in)
Ground clearance Front axle: 690 mm (27.2 in)
Weight (shipping) 8,042 kg (17,730 lbs)
Fuel tank capacity 390.0 liters (103 US gal.; 85.8 Imp. gal)
Battery Two 12V, CCA 925A
Cabin type Cab (standard)
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 6.8 L, 6,784 cm2, (414.0 cu·in)
Bore and stroke 106.0 mm X 127.0 mm (4.17 in X 5 in)
Compression ratio 17.0:1
Horsepower 207.9 PS (152.9 kW; 205.0 HP) at 2,100 rpm
Starter Electric
Oil capacity: 26.0 L (27.5 US. qt, 22.9 Imp. qt.)

Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Power
Brakes Hydraulic wet disc
Transmission model PowrQuad PLUS
Transmission type Partial power shift
Gears 16 forward and 16 reverse
Speed Forward: 29.4 kmh (18.3 mph) Reverse: 31.0 kmh (19.3 mph)
Transmission model AutoQuad PLUS
Transmission type Partial power shift
Gears 20 forward and 20 reverse
Speed Forward: 41.9 kmh (26 mph) Reverse: 43.5 kmh (27.0 mph)
Transmission model
Transmission type Infinitely Variable Transmission (IVT)
Gears Infinite forward and reverse
Tires
Front tires Ag: 420/90R30
Rear tires Ag: 480/80R46

Three-Point Hitch
Category III
Control type
Lift capacity (at ends) 4,560 kg (10,055 lbs)
6,350 kg (14,000 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with hydraulic wet disc clutch
Rear PTO speed 1000, 540/1000 rpm
Hydraulic system
Hydraulic type Closed center load-sensing
Hydraulic capacity 107.9 L (28.5 US. gal, 23.7 Imp. gal.)
Pressure 2900 psi (199.9 bar)
Valves 2 to 7
SCV flow 30.0 gpm (113.6 lpm)
Total flow 32.0 gpm (121.1 lpm)
45.0 gpm (170.3 lpm)

Maybe that’s all the information about the John Deere 7830 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment