John Deere 8200

Specifications and review tractor John Deere 8200 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 8200The John Deere 8200 is a 2WD or 4WD row-crop tractor from the 8000/8000T series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1995 to 1999.

The John Deere 8200 is equipped with one of two engines: a 7.6 L (466.0 cu·in) six-cylinder diesel engine or a 8.1 L (496.0 cu·in) two-cylinder diesel engine and a full power shift transmission with 16 forward and 4 reverse gears and hydraulic wet disc clutch.

The tractor could be equipped with the following engines:

  • John Deere diesel engine (1995-1996). It is a 7.6 L, 7,636 cm2, (466.0 cu·in) six-cylinder turbocharged diesel engine with 116.0 mm (4.57 in) of the cylinder bore and 121.0 mm (4.76 in) of the piston stroke. The compression ratio rating is 15.1:1. This engine produced 182.5 PS (134.2 kW; 180.0 HP) at 2,200 rpm of output power.
  • John Deere diesel engine (1997-1999). It is a 8.1 L, 8,128 cm2, (496.0 cu·in) two-cylinder turbocharged diesel engine. The cylinder bore is 116.0 mm (4.57 in) and the piston stroke is 129.0 mm (5.08 in). This engine produced 182.5 PS (134.2 kW; 180.0 HP) at 2,200 rpm of output power.

The JD 8200 is equipped with hydrostatic power steering, differential hydraulic wet disc brakes, CommandView cab (standard) and 511.0 liters (135 US gal.; 112.4 Imp. gal) fuel tank.


John Deere 8200 Specifications

General Specifications
Model John Deere 8200
Length 5,240 mm (206.3 in)
Width
Height 3,050 mm (120.1 in)
Wheel base 2WD: 3,110 mm (122.4 in)
4WD: 2,940 mm (115.7 in)
Ground clearance 2WD: 800 mm (31.5 in)
4WD: 580 mm (22.8 in)
Weight (shipping) 2WD: 7,465 kg (16,457 lbs)
4WD: 8,120 kg (17,902 lbs)
Fuel tank capacity 511.0 liters (135 US gal.; 112.4 Imp. gal)
Battery Two 12V, CCA 1850A
Cabin type CommandView Cab (standard)
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 7.6 L, 7,636 cm2, (466.0 cu·in)
Bore and stroke 116.0 mm X 121.0 mm (4.57 in X 4.76 in)
Compression ratio 15.1:1
Horsepower 182.5 PS (134.2 kW; 180.0 HP) at 2,200 rpm
Starter Electric
Oil capacity: 23.5 L (24.8 US. qt, 20.7 Imp. qt.)
Coolant capacity: 27.3 L (28.8 US. qt, 24 Imp. qt.)
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 2
Fuel type Diesel
Displacement 8.1 L, 8,128 cm2, (496.0 cu·in)
Bore and stroke 116.0 mm X 129.0 mm (4.57 in X 5.08 in)
Horsepower 182.5 PS (134.2 kW; 180 HP) at 2,200 rpm
Starter Electric
Oil capacity: 28.0 L (29.6 US. qt, 24.6 Imp. qt.)
Coolant capacity: 28.4 L (30 US. qt, 25 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Differential hydraulic wet disc
Final drive Inboard planetary
Differential lock Electro-hydraulic
Transmission model John Deere PowerShift
Transmission type Full power shift with hydraulic wet disc clutch
Gears 16 forward and 4 reverse
Speed Forward: 34.0 kmh (21.1 mph) Reverse: 10.4 kmh (6.5 mph)
Transmission oil capacity 140.1 L (37 US. gal, 30.8 Imp. gal.)
Tires
Front tires Ag: 11.00-24
Rear tires Ag: 18.4R46

Three-Point Hitch
Category III/IIIN
Control type Electro-hydraulic draft sensing
Lift capacity (at ends) 4,720 kg (10,410 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1000, 540/1000 rpm
Hydraulic system
Hydraulic type Closed center pressure-flow compensated (PFC)
Hydraulic capacity 140.0 L (37 US. gal, 30.8 Imp. gal.)
Pressure 2900 psi (200 bar)
Valves 3 to 5
SCV flow 30.0 gpm (113.6 lpm)

Maybe that’s all the information about the John Deere 8200 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment