John Deere 8235R

Specifications and review tractor John Deere 8235R Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 8235RThe John Deere 8235R is a 2WD or 4WD row-crop tractor from the 8R series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 2011 to 2013. The John Deere 8235R is equipped with a 9.0 L (548.0 cu·in) six-cylinder diesel engine and one of two transmissions: a full power shift transmission with 16 forward and 4 reverse gears or a infinitely variable transmission (IVT) with infinite forward and reverse gears.

The JD 8235R row-crop tractor used the John Deere PowerTech PSX engine. It is a 9.0 L, 8,980 cm2, (548.0 cu·in) six-cylinder turbocharged diesel engine with 118.0 mm (4.65 in) of the cylinder bore and 136.0 mm (5.35 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 238.3 PS (175.2 kW; 235.0 HP) at 2,100 rpm of output power.

The JD 8235R is equipped with hydrostatic power or ActiveCommand (ACS) (optional) steering, differential hydraulic wet disc brakes, CommandView II cab (standard) and 695.0 liters (183.6 US gal.; 152.9 Imp. gal) fuel tank.


John Deere 8235R Specifications

General Specifications
Model John Deere 8235R
Length 6,190 mm (243.7 in)
Width Axle: 2,430 mm (95.7 in)
Long axle: 3,000 mm (118.1 in)
Height (cab) 3,520 mm (138.6 in)
Wheelbase 2WD: 3,210 mm (126.4 in)
1300 MFWD: 3,050 mm (120.1 in)
1500/ILS: 3,020 mm (118.9 in)
Ground clearance (front axle) 2WD: 740 mm (29.1 in)
1300: 610 mm (24 in)
1500: 590 mm (23.5 in)
ILS: 510 mm (20.1 in)
Weight (operating) 12,345 kg (27,216 lbs)
ILS: 13,720 kg (30,247 lbs)
Fuel tank capacity 695.0 liters (183.6 US gal.; 152.9 Imp. gal)
Battery Two 12V, CCA 925A
Cabin type CommandView II cab standard
Engine
Engine model John Deere PowerTech PSX
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 9.0 L, 8,980 cm2, (548.0 cu·in)
Bore and stroke 118.0 mm X 136.0 mm (4.65 in X 5.35 in)
Compression ratio 16.0:1
Horsepower 238.3 PS (175.2 kW; 234.9 HP) at 2,100 rpm
Starter Electric
Oil capacity: 1300 axle: 25.0 L (26.4 US. qt, 22.0 Imp. qt.)
1500/ILS axle: 28.0 L (29.6 US. qt, 24.6 Imp. qt.)
Coolant capacity: 41.0 L (43.3 US. qt, 36.1 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydrostatic power or ActiveCommand Steering (ACS) (optional)
Brakes Differential hydraulic wet disc
Differential lock Hydraulic rear lock, front lock on 1500 and ILS front axles
Transmission model John Deere Automatic PowerShift
Transmission type Full power shift
Gears 16 forward and 4 reverse
Speed Forward: 42.2 kmh (26.2 mph) Reverse: 15.1 kmh (9.4 mph)
Transmission model John Deere AutoPowr
Transmission type Infinitely Variable Transmission (IVT)
Gears Infinite forward and reverse
Speed Forward: 50.0 kmh (31.1 mph) Reverse: kmh (0 mph)
Tires
Front tires Ag: 11.00-24 (2WD), 420/90R30 (4WD)
Rear tires Ag: 480/80R46

Three-Point Hitch
Category III/IIIN or IVN/III (optional)
Control type
Lift capacity (at 610 mm/24 in) III/IIIN (2011): 6,030 kg (13,300 lbs)
III/IIIN (2011): 7,845 kg (17,300 lbs)
IV/III (2011): 8,300 kg (18,300 lbs)
III/IIIN (2012): 6,170 kg (13,600 lbs)
III/IIIN (2012): 7,985 kg (17,600 lbs)
IV/III (2012): 8,485 kg (18,600 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1000 (1-3/4)
1000 (1-3/8 optional)
540 (1-3/8 optional)
Hydraulic system
Hydraulic type Closed center pressure-flow compensated
Pressure 2900 psi (200 bar)
Valves 3 to 5
Pump flow 44.0 gpm (166.6 lpm)
Optional: 60.0 gpm (227.1 lpm)

Maybe that’s all the information about the John Deere 8235R tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment