Specifications and review tractor John Deere 8245R (2009-2010) Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The John Deere 8245R is a 4WD row-crop tractor from the 8R series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 2009 to 2010. The John Deere 8245R is equipped with a 9.0 L (548.0 cu·in) six-cylinder diesel engine and one of two transmissions: a full power shift transmission with 16 forward and 4 reverse gears or a infinitely variable transmission transmission with infinite forward and reverse gears.
The JD 8245R row-crop tractor used the John Deere engine. It is a 9.0 L, 8,980 cm2, (548.0 cu·in) six-cylinder variable geometry turbocharged diesel engine with 118.0 mm (4.65 in) of the cylinder bore and 136.0 mm (5.35 in) of the piston stroke. The compression ratio rating is 16.3:1. This engine produced 248.5 PS (182.7 kW; 245.0 HP) at 2,100 rpm of output power.
The John Deere 8245R is equipped with hydrostatic power steering, differential hydraulic wet disc brakes, CommandView cab (standard) and 681.3 liters (180 US gal.; 149.9 Imp. gal) fuel tank.
|
John Deere 8245R Specifications
General Specifications | |
Model | John Deere 8245R |
Length | 6,120 mm (240.9 in) |
Width | – |
Height (cab) | 3,240 mm (127.6 in) |
Wheel base | 3,050 mm (120.1 in) ILS axle: 3,020 mm (118.9 in) |
Ground clearance | 680 mm (26.8 in) ILS axle: 580 mm (22.8 in) |
Weight | – |
Fuel tank capacity | 681.3 liters (180.0 US gal.; 150.0 Imp. gal) |
Battery | Two 12V, CCA 925A |
Cabin type | CommandView cab (standard) |
Engine | |
Engine model | John Deere |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 9.0 L, 8,980 cm2, (548.0 cu·in) |
Bore and stroke | 118.0 mm X 136.0 mm (4.65 in X 5.35 in) |
Compression ratio | 16.3:1 |
Horsepower | 248.5 PS (182.7 kW; 245.0 HP) at 2,100 rpm |
Starter | Electric |
Oil type | SAE 10W-30, 10W-40 |
Oil capacity: | 25.0 L (26.4 US. qt, 22 Imp. qt.) |
Coolant capacity: | 40.0 L (42.3 US. qt, 35.2 Imp. qt.) |
|
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Hydrostatic power |
Brakes | Differential hydraulic wet disc |
Transmission model | John Deere PowerShift |
Transmission type | Full power shift |
Gears | 16 forward and 4 reverse |
Speed | Forward: 39.7 kmh (24.7 mph) Reverse: 10.9 kmh (6.8 mph) |
Transmission oil capacity |
151.4 L (40 US. gal, 33.3 Imp. gal.) ILS: 159.0 L (42 US. gal, 35 Imp. gal.) |
Transmission model | John Deere IVT |
Transmission type | Infinitely Variable Transmission |
Gears | Infinite forward and reverse |
Speed | Forward: 50.0 kmh (31.1 mph) |
Transmission oil capacity |
151.4 L (40 US. gal, 33.3 Imp. gal.) ILS: 159.0 L (42 US. gal, 35 Imp. gal.) |
Tires | |
Front tires | Ag: 420/90R30 |
Rear tires | Ag: 480/80R46 |
|
Three-Point Hitch | |
Category | III/IIIN or IVN/III |
Control type | – |
Lift capacity |
5,624 kg (12,400 lbs) Optional: 6,894 kg (15,200 lbs) Optional: 8,300 kg (18,300 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed |
1000 (1-3/4) Optional: 540/1000 (1-3/8) |
Hydraulic system | |
Hydraulic type | Closed center, pressrue and flow compensated |
Hydraulic capacity |
151.4 L (40 US. gal, 33.3 Imp. gal.) ILS: 159.0 L (42 US. gal, 35 Imp. gal.) |
Pressure | 2900 psi (199.9 bar) |
Valves | 3 to 5 |
Pump flow | 35.0 gpm (132.5 lpm) |
Total flow |
44.0 gpm (166.6 lpm) Optional: 60.0 gpm (227.1 lpm) |
Maybe that’s all the information about the John Deere 8245R (2009-2010) tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you