Specifications and review tractor John Deere 8320 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The John Deere 8320 is a 4WD row-crop tractor from the 8020 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 2002 to 2005. The John Deere 8320 is equipped with a 8.1 L (496.0 cu·in) six-cylinder diesel engine and a full power shift transmission with 16 forward and 4 reverse gears and hydraulic wet disc clutch.
The JD 8320 row-crop tractor used the John Deere engine. It is a 8.1 L, 8,128 cm2, (496.0 cu·in) six-cylinder turbocharged diesel engine with 116.0 mm (4.57 in) of the cylinder bore and 129.0 mm (5.08 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 253.5 PS (186.4 kW; 250.0 HP) at 2,200 rpm of output power.
The John Deere 8320 is equipped with hydrostatic power steering, hydraulic wet disc brakes, cab (standard), and 511.0 liters (135 US gal.; 112.4 Imp. gal) fuel tank.
|
John Deere 8320 Specifications
General Specifications | |
Model | John Deere 8320 |
Length | 5,330 mm (209.8 in) Long frame: 5,380 mm (211.8 in) |
Width | – |
Height (cab) | 3,050 mm (120.1 in) |
Wheel base |
4WD: 2,960 mm (116.5 in) ILS: 2,930 mm (115.7 in) Long frame: 3,020 mm (118.9 in) |
Weight (operating) | 9,085 kg (20,029 lbs) |
Fuel tank capacity |
Standard: 511.0 liters (135 US gal.; 112.4 Imp. gal) Optional: 605.6 liters (160 US gal, 133.2 Imp. gal) |
Battery | Two 12V, CCA 925A |
Cabin type | Cab (standard) |
Engine | |
Engine model | John Deere |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 8.1 L, 8,128 cm2, (496.0 cu·in) |
Bore and stroke | 116.0 mm X 129.0 mm (4.57 in X 5.08 in) |
Compression ratio | 16.5:1 |
Horsepower | 253.5 PS (186.4 kW; 250 HP) at 2,200 rpm |
Starter | Electric |
Oil type | SAE 5W-30, 0W-40 |
Oil capacity: | 25.0 L (26.4 US. qt, 22 Imp. qt.) |
Coolant capacity: | 34.0 L (35.9 US. qt, 29.9 Imp. qt.) |
|
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Hydrostatic power |
Brakes | Hydraulic wet disc |
Transmission model | John Deere PowerShift |
Transmission type | Full power shift with hydraulic wet disc clutch |
Gears | 16 forward and 4 reverse |
Speed | Forward: 39.9 kmh (24.8 mph) Reverse: 10.9 kmh (6.8 mph) |
Transmission oil capacity |
140.0 L (37 US. gal, 30.8 Imp. gal.) ILS: 150.0 liters (39.6 US gal, 33 Imp. gal) |
Tires | |
Front tires | Ag: 16.9R30 |
Rear tires | Ag: 18.4R46 |
|
Three-Point Hitch | |
Category | III/IIIN |
Control type | – |
Lift capacity (at ends) |
6,230 kg (13,740 lbs) 6,885 kg (15,180 lbs) (optional) |
Front Hitch | |
Category | IIIN (optional) |
Lift capacity (at ends) | 5,000 kg (11,000 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent with hydraulic wet disc clutch |
Rear PTO speed | 1000 (1.75) or 540/1000 (1.375 optional) rpm |
Hydraulic system | |
Hydraulic type | Closed center pressure-flow compensated (PFC) |
Hydraulic capacity |
140.0 L (37 US. gal, 30.8 Imp. gal.) ILS: 150.0 liters (39.6 US gal, 33 Imp. gal) |
Pressure | 2900 psi (199.9 bar) |
Valves | 5 |
SCV flow | 30.0 gpm (113.6 lpm) |
Total flow |
33.5 gpm (126.8 lpm) 42.5 gpm (160.9 lpm) – optional |
Maybe that’s all the information about the John Deere 8320 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you