John Deere 9420

Specifications and review tractor John Deere 9420 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 9420The John Deere 9420 is a four-wheel drive tractor from the 9020 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 2002 to 2007. The John Deere 9420 is equipped with a 12.5 L (765.0 cu·in) six-cylinder diesel engine and one of two transmissions: a partial power shift transmission with 24 forward and 6 reverse gears or a full power shift transmission with 18 forward and 6 reverse gears.

The John Deere 9420 four-wheel drive used the John Deere engine. It is a 12.5 L, 12,536 cm2, (765.0 cu·in) six-cylinder turbocharged diesel engine with 127.0 mm (5 in) of the cylinder bore and 165.0 mm (6.5 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 431 PS (316.9 kW; 425.0 HP) at 2,100 rpm of output power.

The JD 9420 is equipped with hydrostatic articulated steering, hydraulic wet disc brakes, CommandView cab (standard) with air-conditioning, and 1022.0 liters (270 US gal.; 224.8 Imp. gal) fuel tank.

John Deere 9420 Specifications

General Specifications
Model John Deere 9420
Length 6,950 mm (273.6 in)
Width 2,930 mm (115.4 in)
Height (cab) 3,490 mm (137.4 in)
Wheel base 3,500 mm (137.8 in)
Ground clearance Front axle: 730 mm (28.7 in)
Drawbar: 430 mm (16.9 in)
Weight (shipping) 15,820 kg (34,877 lbs)
Fuel tank capacity 1022.0 liters (270 US gal.; 224.8 Imp. gal)
Battery Three 12V, CCA 925A
Cabin type CommandView cab (standard) with air-conditioning
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 12.5 L, 12,536 cm2, (765.0 cu·in)
Bore and stroke 127.0 mm X 165.0 mm (5 in X 6.5 in)
Compression ratio 17.0:1
Horsepower 431 PS (316.9 kW; 425.0 HP) at 2,100 rpm
Starter Electric
Oil capacity: 41.6 L (44 US. qt, 36.6 Imp. qt.)
Coolant capacity: 60.6 L (64 US. qt, 53.3 Imp. qt.)

Transmission and chassis
Chassis 4×4 articulated 4WD
Steering type Hydrostatic articulated
Brakes Hydraulic wet disc
Transmission model John Deere PowerSync
Transmission type Partial power shift
Gears 24 forward and 6 reverse
Speed Forward: 38.6 kmh (24 mph) Reverse: 12.4 kmh (7.7 mph)
Transmission oil capacity 128.7 L (34.0 US. gal, 28.3 Imp. gal.)
With PTO: 132.5 L (35.0 US. gal, 29.1 Imp. gal.)
Transmission model John Deere Powershift
Transmission type Full power shift
Gears 18 forward and 6 reverse
Speed Forward: 40.1 kmh (24.9 mph) Reverse: 12.7 kmh (7.9 mph)
Transmission oil capacity 134.0 L (35.4 US. gal, 29.5 Imp. gal.)
With PTO: 137.8 L (36.4 US. gal, 30.3 Imp. gal.)
Front tires Ag: 710/70R42
Rear tires Ag: 710/70R42

Three-Point Hitch
Category III or IV/IVN
Control type
Lift capacity (at ends) 6,291 kg (13,870 lbs)
Optional: 6,552 kg (14,445 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1000 rpm
Hydraulic system
Hydraulic type Closed center pressure/flow compensated
Hydraulic capacity 102.2 L (27.0 US. gal, 22.5 Imp. gal.)
With 3-point: 106.0 L (28.0 US gal, 23.3 Imp. gal)
Hi-flow: 113.6 L (30.0 US gal, 25.0 Imp. gal)
Hi-flow/3-point: 117.3 L (31.0 US gal, 25.8 Imp. gal)
Pressure 2900 psi (200 bar)
Valves 4 or 5
Pump flow 30.0 gpm (113.6 lpm)
Total flow 44.0 gpm (166.6 lpm)
Powershift: 48.0 gpm (181.7 lpm)
Hi-flow: 78.0 gpm (295.2 lpm)

Maybe that’s all the information about the John Deere 9420 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment