John Deere 9560R

Specifications and review tractor John Deere 9560R Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

John Deere 9560RThe John Deere 9560R is a four-wheel drive tractor from the 9R/RT series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 2012 to 2014. The John Deere 9560R is equipped with a 13.5 L (826.7 cu·in) six-cylinder diesel engine and a full power shift with hydraulic wet disc clutch transmission with 18 forward and 6 reverse gears.

The JD 9560R four-wheel drive used the John Deere PowerTech PSX engine. It is a 13.5 L, 13,547 cm2, (826.7 cu·in) six-cylinder turbocharged diesel engine with 132.0 mm (5.2 in) of the cylinder bore and 165.0 mm (6.5 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 567.9 PS (417.6 kW; 560.0 HP) at 2,100 rpm of output power.

The John Deere 9560R is equipped with hydrostatic power steering, hydraulic wet disc brakes, CommandView II cab (standard) with air-conditioning and 1324.8 liters (350 US gal.; 291.4 Imp. gal) fuel tank.


John Deere 9560R Specifications

General Specifications
Model John Deere 9560R
Length 7,160 mm (281.9 in)
Width 3,040 mm (119.7 in)
Height (cab) 3,680 mm (144.9 in)
Wheel base 3,500 mm (137.8 in)
Weight (operating) 19,690 kg (43,409 lbs)
Fuel tank capacity 1324.8 liters (350 US gal.; 291.4 Imp. gal)
Battery Three 12V, CCA 925A
Cabin type CommandView II cab (standard) with air-conditioning
Engine
Engine model John Deere PowerTech PSX
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 13.5 L, 13,547 cm2, (826.7 cu·in)
Bore and stroke 132.0 mm X 165.0 mm (5.2 in X 6.5 in)
Compression ratio 16.0:1
Horsepower 567.9 PS (417.6 kW; 560.0 HP) at 2,100 rpm
Starter Electric

Transmission and chassis
Chassis 4×4 articulated 4WD
Steering type Hydrostatic power
Brakes Hydraulic wet disc
Final drive Inboard planetary with double-reduction axle
Differential lock Fully-locking electro-hydraulic
Transmission model John Deere PowerShift
Transmission type Full power shift with hydraulic wet disc clutch
Gears 18 forward and 6 reverse
Speed Forward: 42.7 kmh (26.5 mph) Reverse: 13.5 kmh (8.4 mph)
Tires
Front tires Ag: 800/70R38
Rear tires Ag: 800/70R38

Three-Point Hitch
Category IVN/IV
Control type Electronic draft sensing
Lift capacity (at ends) 6,940 kg (15,300 lbs)
Optional: 9,070 kg (20,000 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent (optional)
Rear PTO speed 1000 rpm
Hydraulic system
Hydraulic type Closed center pressure flow compensated (PFC)
Pressure 2900 psi (200.0 bar)
Valves 4 to 6
Pump flow 48.0 gpm (181.7 lpm)
78.0 gpm (295.3 lpm)
SCV flow 37.0 gpm (140.1 lpm)
45.0 gpm (170.3 lpm)

Maybe that’s all the information about the John Deere 9560R tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment