Kubota L245

Specifications and review tractor Kubota L245 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

Kubota L245The Kubota L245 is a 2WD or 4WD (L245DT) compact utility tractor from the L series. This tractor was manufactured by the Kubota from 1976 to 1985. The Kubota L245 is equipped with a 1.1 L three-cylinder diesel engine and gear type transmission with 8 forward and 2 reverse gears. The high clearance version Kubota L245HC was also available.

The Kubota L245 compact utility tractor used the Kubota DH1101 engine. It is a 1.1 L, 1,115 cm2, (68.0 cu·in) three-cylinder natural aspirated diesel engine with 76.0 mm (2.99 in) of the cylinder bore and 82.0 mm (3.23 in) of the piston stroke. The compression ratio rating is 21.0:1. This engine produced 25.3 PS (18.6 kW; 25.0 HP) of maximum horsepower and 22.3 PS (16.4 KW; 22.0 HP) of PTO output power.

The Kubota L245 is equipped with manual steering, differential mechanical expanding shoe brakes, open operator station (Two-post ROPS was available as an option) and liters 22.0 liters (5.8 US gal.; 4.8 Imp. gal) fuel tank.


Kubota L245 L245 Specifications

General Specifications
Model Kubota L245 L245
Length 2,570 mm (101.2 in)
Width 1,310 mm (51.6 in)
Height 2,100 mm (82.7 in)
Wheel base 2WD: 1,600 mm (63.0 in)
4WD: 1,550 mm (61.2 in)
Weight 2WD: 996 kg (2,196 lbs)
4WD: 1,080 kg (2,382 lbs)
Fuel tank capacity 22.0 liters (5.8 US gal.; 4.8 Imp. gal)
Battery 12V
Cabin type Open operator station. Two-post ROPS (option)
Engine
Engine model Kubota DH1101
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.1 L, 1,115 cm2, (68.0 cu·in)
Bore and stroke 76.0 mm X 82.0 mm (2.99 in X 3.23 in)
Compression ratio 21.0:1
Horsepower 25.3 PS (18.6 kW; 25.0 HP)
Starter Electric
Oil capacity: 6.1 L (6.45 US. qt, 5.37 Imp. qt.)
Coolant capacity: 6.6 L (6.97 US. qt, 5.81 Imp. qt.)
Injection timing 25 ° B.T.D.C.
Injection pressure 13,720-14,700 kPa (1,990-2,135 psi)
Intake / Exhaust valve clearance 0.18-0.22 mm (0.007-0.009 in)
Compression pressure 3,235 kPa (470 psi)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Manual
Brakes Differential mechanical expanding shoe
Front axle differential case(4WD) 1.1 L (1.16 US. qts., 0.97 Imp. qts.)
Front axle outer drive case (4WD) – each 0.8 L (0.85 US. qts., 0.7 Imp. qts.)
Steering gear box 0.3 L (0.32 US. qts., 0.26 Imp. qts.)
Transmission model
Transmission type Gear type
Gears 8 forward and 2 reverse
Speed Forward: 19.1 kmh (11.9 mph) Reverse: 9.3 (5.8 mph)
Transmission oil capacity 2WD: 22.0 L (5.8 US. gal, 4.8 Imp. gal.)
4WD: 23.0 L (6.1 US. gal, 5.1 Imp. gal.)
Tires
Front tires Ag: 5.00-15
Rear tires Ag: 11.2-24 or 11.2-28 (L245HC)

Three-Point Hitch
Caterogy I
Control type
Lift capacity 698 kg (1,539 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO spped 540/700/1000 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 2WD: 22.0 L (5.8 US. gal, 4.8 Imp. gal.)
4WD: 23.0 L (6.1 US. gal, 5.1 Imp. gal.)
Pressure 2,000 psi (137.9 bar)
Total flow 3.7 gpm (14 lpm)

Maybe that’s all the information about the Kubota L245 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment